Microsoft visio методичка

Visio позволяет преобразовать сложный текст и таблицы, которые трудно понять, в наглядные схемы, которые позволяют быстро донести информацию. Существует множество типов схемVisio, в том числе организаций, схемы сети, рабочий процесс, планы для дома и офиса. Начало работы сVisio можно обобщить в три основных этапа: использование шаблона, организация и соединение фигур, а также изменение фигур с текстом.

Примечание: Если у вас Visio, план 2, у вас есть доступ как к установленному приложению, так и к веб-версии Visio. При Visio (план 1) вы получаете только веб-версиюVisio. Не знаете, какая у вас лицензия? Вы можете проверить, какая у вас версия.

Примечание: Если вы еще не установили приложение Visio_generic Visio, см. Visio Visio.

Учебник. 3 основных шага по созданию схемы Visio:

  1. Выбор и открытие шаблона

  2. У упорядока и соединение фигур

  3. Добавление текста к фигурам и соединителю

Выбор и открытие шаблона

Шаблоны включают в себя шаблоны, фигуры и размеры сетки, которые помогут вам быстро и легко при создании схемы начать работу.

  • Шаблоны также можно найти в виде шаблонов, в которые вмечены фигуры, необходимые для создания определенного типа чертежа.

    Например, вместе с шаблоном План дома открывается набор элементов с фигурами стен, мебели, бытовой техники, шкафов и т. д.

    Шаблон Организационная диаграмма включает готовые фигуры для руководителей, менеджеров, ассистентов, консультантов, вакансий и др.

  • Соответствующий размер сетки и разметка линейки

    Для некоторых документов необходимо указать определенный масштаб. Например, шаблон План участка открывается в масштабе проектирования, где один дюйм (25,4 мм) равен десяти футам (304,8 см). Все необходимые настройки для определенных типов чертежей уже установлены в шаблоне.

  • Специальные вкладки

    Некоторые шаблоны имеют уникальные функции, которые можно найти на специальных вкладках ленты. Например, при открываемом шаблоне «План» появляется вкладка «План». На вкладке «План» можно настроить параметры отображения, специфичные для схем плана работы.

  • Мастера, которые помогают в создании особых типов документов

    В некоторых случаях приVisio шаблона можно начать работу с помощью мастера. Например, в шаблоне План расстановки открывается мастер, помогающий задать параметры помещения или комнаты.

  1. ЗапуститеVisiovisioили откройте его в Интернете. ЕслиVisio уже открыта, выберите «Файл» > «>».

    Примечание: Еще не установилиVisio ? Если у вас есть Visio, план 2, вы можете скачать и установить настольное приложение Visio.

  2. Выберите нужный шаблон или выберите «Базовая схема», чтобы начать с нуля.

    На вкладке Категории доступны и другие шаблоны. Кроме того, вы можете воспользоваться функцией поиска шаблонов в Интернете.

    Коллекция шаблонов

  3. Если вы используете ссылку на рабочий стол, может потребоваться указать определенный тип шаблона и выбрать «Создать».

У упорядока и соединение фигур

Чтобы создать схему, перетащите фигуры из этого окна на полотно и соедините их. Существует несколько способов соединения фигур, но самый простой — с помощью стрелок автосоединения.

Примечание: Если документ основан на шаблоне, предполагающем соединение фигур (например, на шаблоне блок-схемы), функция автосоединения должна быть доступна по умолчанию. Если вы не видите стрелок автосоединения Изображение кнопки при наведении указателя мыши на фигуру, это означает, что функция автосоединения отключена. В этом случае на вкладке Главная в группе Сервис нажмите кнопку Соединительная линия.

Фигуры Visio — это готовые объекты, перетаскив которые можно перетаскивать на страницу схемы.

При перетаскивании фигуры из окна «Фигуры» на страницу документа исходная фигура остается в наборе. Она называется образцом фигуры. Фигура, помещенная в документ, является копией — так называемым экземпляром этого образца. В документ можно поместить сколько угодно экземпляров одной и той же фигуры.

Вместо статических рисунков можно создавать схемы, подключенные к данным,Visio, которые отображают данные, их легко обновлять и значительно повысить производительность. Вы можете использовать в Visio разнообразные шаблоны схем и Visio обмениваться информацией об организационных системах, ресурсах и процессах, а также совместно использовать их.

Вращение и изменение размера фигур

  • Маркеры поворота

    Круглый маркер Маркер поворота над выбранной фигурой называется маркером поворота. Чтобы повернуть фигуру влево или вправо, перетащите его в соответствующую сторону.

  • Стрелки для автосоединения

    Соединительные стрелки Изображение кнопки помогают соединять фигуры друг с другом, как было описано в предыдущем разделе.

  • Маркеры выбора для изменения размера фигуры

    Изменить высоту и ширину фигуры можно с помощью квадратных полосы выделения. Щелкните и перетащите угловой угол фигуры, чтобы увеличить фигуру, не изменяя ее пропорции, или щелкните и перетащите сбоку, чтобы сделать фигуру выше или шире.

Фигуры Visio могут удерживать данные

К каждой фигуре можно добавить данные, введя их в окне Данные фигуры: на вкладке Вид в группе Показать нажмите кнопку Области задач и выберите элемент Данные фигуры. В приложении Visio Professional Edition также можно импортировать данные из внешнего источника.

По умолчанию данные не отображаются в документе. Чтобы отобразить данные для отдельной фигуры, откройте окно Данные фигуры, последовательно выбрав в меню Данные пункты Показать или скрыть и Окно данных фигуры, а затем выберите нужную фигуру.

Если вам необходимо одновременно отобразить данные для нескольких фигур, то вы можете использовать функцию «Рисунки, связанные с данными», находящуюся также на вкладке Данные. На следующем рисунке одновременно показаны данные для двух деревьев.

Одновременное отображение данных для двух фигур с помощью рисунков, связанных с данными

Фигуры Visio с особым поведением

Многие фигуры Visio обладают особым поведением, которое проявляется при растяжении, щелчке правой кнопкой мыши или перемещении желтого управляющего маркера.

Например, чтобы показать больше людей, можно растянуть фигуруЛюди, или чтобы показать рост цветка, можно растянуть фигуру Цветок.

При горизонтальном растяжении фигуры с людьми отображается до четырех человек   При вертикальном растяжении цветок в фигуре цветка становится выше

Совет: Чтобы узнать о дополнительных возможностях фигуры, щелкните фигуру правой кнопкой мыши и посмотрите в контекстном меню наличие дополнительных команд.

Если вы составляете организационную диаграмму, фигуры помогут вам автоматически построить структуру отчетности. Перетащите фигуру каждого сотрудника на фигуру руководителя в диаграмме. Фигуры автоматически соединятся в иерархическом порядке.

  1. В окне «Фигуры» выберите фигуру и перетащите ее на полотно.

    Перетаскивание фигуры для добавления

  2. Нажмите указатель мыши на одну из стрелок, и появится мини-панель инструментов с четырьмя верхними фигурами в области «Быстрые фигуры».

    Мини-панель инструментов «Автосоединение»
    Выберите фигуру, и она автоматически соединится со стрелкой, выбранной вами.

  3. Вы также можете перетащить все фигуры на полотно. Затем на удержание удерживайте указатель мыши на фигуре, пока не появятся стрелки. Затем перетащите стрелку на фигуру, к ней нужно подключиться.

    Перетаскивание фигуры на стрелку автосоединения

  4. Если вы используете Visio, можно также перетащить новую фигуру непосредственно из окна «Фигуры» к существующим стрелкам и автоматически соединить их.

    Перетаскивание фигуры на стрелку автосоединения

Добавление текста к фигурам и соединителю

Теперь нужно добавить сведения на схему, добавив текст. Дополнительные сведения о работе с текстом см. в статьях Добавление, изменение, перемещение и поворот текста на фигурах и Добавление текста на страницу.

  1. Выберите фигуру.

  2. Введите текст. Когда вы начнете вводить текст,Visio переключит выбранную фигуру в режим редактирования текста.

    Выделение фигуры и ввод текста

  3. Щелкните пустую область на странице или нажмите клавишу ESC.

    Примечание: Чтобы переместить текст на фигуре, перейдите на home > Tools >Text Block Блок текстаи перейдите к фигуре, которая имеет текст. Перетащите текст, а затем снова нажимайте кнопку «Главная» > инструменты >указателя Выделение объектов , когда все будет готово.

Добавьте таким же способом текст для соединительной линии. Нажав ESC или щелкнув страницу, снова выберите соединительную линию, и вы заметите, что в тексте появился небольшой прямоугольник — это маркер для перемещения текстового блока. Щелкните его и перетащите вверх, вниз или в сторону от соединительной линии.

Настройка схемы Visio

Создав схему Visio, вы можете сделать это самостоятельно.

  1. На вкладке Конструктор попробуйте навести указатель мыши на разные темы.

    При этом каждая из них будет временно применяться для предварительного просмотра.

    Коллекция тем в Visio

  2. Чтобы увидеть другие доступные темы, нажмите кнопку » Кнопка "Дополнительно"«.

  3. Щелкните нужную тему, чтобы применить ее к схеме.

  1. Нажмите Конструктор, а затем — Подложки.

  2. Выберите фон.

    Схема получит новый фон и новую фоновую страницу с иконой «Фон VBackground-1». Эта страница вы увидите вкладки страниц в нижней части полотна.

    Вкладка фона в Visio

  1. Нажмите Конструктор > Рамки и заголовки и выберите подходящий стиль заголовка.

  2. Выберите стиль заголовка.

    Заголовок и рамка будут добавлены на страницу фонового рисунка.

  3. В нижней части области построения схемы щелкните вкладку Фон Visio-1.

  4. Щелкните текст заголовка.

    Будет выделена вся рамка, но после начала ввода текста будет изменен заголовок.

  5. Введите заголовок, а затем нажмите клавишу ESC.

  6. Чтобы отредактировать другой текст в рамке, нужно сначала выделить всю рамку целиком, а затем щелкнуть текст, который требуется изменить, и начать ввод. Возможно, потребуется нажать несколько раз, чтобы выделить текст.

  7. Щелкните Страница-1 в нижнем правом углу страницы, чтобы вернуться к документу.

Учебник. 3 основных шага по созданию схемы Visio:

  1. Выбор и открытие шаблона

  2. У упорядока и соединение фигур

  3. Добавление текста к фигурам и соединителю

Выбор и открытие шаблона

Шаблоны включают в себя шаблоны, фигуры и размеры сетки, которые помогут вам быстро и легко при создании схемы начать работу.

  • Шаблоны также можно найти в виде шаблонов, в которые вмечены фигуры, необходимые для создания определенного типа чертежа.

    Например, вместе с шаблоном План дома открывается набор элементов с фигурами стен, мебели, бытовой техники, шкафов и т. д.

    Шаблон Организационная диаграмма включает готовые фигуры для руководителей, менеджеров, ассистентов, консультантов, вакансий и др.

  • Соответствующий размер сетки и разметка линейки

    Для некоторых документов необходимо указать определенный масштаб. Например, шаблон План участка открывается в масштабе проектирования, где один дюйм (25,4 мм) равен десяти футам (304,8 см). Все необходимые настройки для определенных типов чертежей уже установлены в шаблоне.

  • Специальные вкладки

    Некоторые шаблоны имеют уникальные функции, которые можно найти на специальных вкладках ленты. Например, при открываемом шаблоне «План» появляется вкладка «План». На вкладке «План» можно настроить параметры отображения, специфичные для схем плана работы.

  • Мастера, которые помогают в создании особых типов документов

    В некоторых случаях при открытии шаблона Visio появляется мастер, который помогает приступить к работе. Например, в шаблоне План расстановки открывается мастер, помогающий задать параметры помещения или комнаты.

  1. Откройте Visio в Интернете. Если Visio уже открыт, выберите «Файл» > «>».

    Примечание: Если у вас есть Visio, план 2, вы также можете скачать и установить классические приложения Visio.

  2. Выберите «Создать» под нужным шаблоном или в области «Базовая схема», чтобы начать с нуля.

У упорядока и соединение фигур

Чтобы создать схему, перетащите фигуры из этого в области «Фигуры» на полотно и соедините их. Существует несколько способов соединения фигур, но самый простой — автоматическое соединение.

Примечание: Дополнительные информацию об использовании фигур см. в веб-приложениях Visio, а также об изменении их размера, поворота и порядка.

  1. В окне «Фигуры» выберите фигуру и перетащите ее на полотно.

    Перетаскивание фигуры для добавления

  2. Нажмите указатель мыши на одну из стрелок, и появится мини-панель инструментов с четырьмя верхними фигурами в области «Быстрые фигуры».

    Мини-панель инструментов «Автосоединение»
    Выберите фигуру, и она автоматически соединится со стрелкой, выбранной вами.

  3. Вы также можете перетащить все фигуры на полотно. Затем на удержание удерживайте указатель мыши на фигуре, пока не появятся стрелки. Затем перетащите стрелку на фигуру, к ней нужно подключиться.

    Перетаскивание фигуры на стрелку автосоединения

  4. Если вы используете классические приложения Visio, можно также перетащить новую фигуру непосредственно из окна «Фигуры» к существующим стрелкам и автоматически соединить их.

    Перетаскивание фигуры на стрелку автосоединения

Добавление текста к фигурам и соединителю

Теперь нужно добавить сведения на схему, добавив текст. Дополнительные сведения о работе с текстом см. в веб-приложениях Visio.

  1. Выберите фигуру.

  2. Введите текст. Когда вы начнете вводить текст,Visio переключит выбранную фигуру в режим редактирования текста.

    Выделение фигуры и ввод текста

  3. Щелкните пустую область на странице или нажмите клавишу ESC.

    Примечание: Чтобы переместить текст на фигуре, перейдите на home > Tools >Text Block Блок текстаи перейдите к фигуре, которая имеет текст. Перетащите текст, а затем снова нажимайте кнопку «Главная» > инструменты >указателя Выделение объектов , когда все будет готово.

Добавьте таким же способом текст для соединительной линии. Нажав ESC или щелкнув страницу, снова выберите соединительную линию, и вы заметите, что в тексте появился небольшой прямоугольник — это маркер для перемещения текстового блока. Щелкните его и перетащите вверх, вниз или в сторону от соединительной линии.

Настройка схемы Visio

Создав схему Visio, вы можете сделать ее собственной.

  1. На вкладке Конструктор попробуйте навести указатель мыши на разные темы.

    При этом каждая из них будет временно применяться для предварительного просмотра.

  2. Чтобы просмотреть другие доступные темы, нажмите кнопку Дополнительные параметры .

  3. Щелкните нужную тему, чтобы применить ее к схеме.

  1. Нажмите Конструктор, а затем — Подложки.

  2. Выберите фон.

    Схема получит новый фон и новую фоновую страницу с иконой «Фон VBackground-1». Эта страница вы увидите вкладки страниц в нижней части полотна.

  1. Нажмите Конструктор > Рамки и заголовки и выберите подходящий стиль заголовка.

  2. Выберите стиль заголовка.

    Заголовок и рамка будут добавлены на страницу фонового рисунка.

  3. В нижней части области построения схемы щелкните вкладку Фон Visio-1.

  4. Щелкните текст заголовка.

    Будет выделена вся рамка, но после начала ввода текста будет изменен заголовок.

  5. Введите заголовок, а затем нажмите клавишу ESC.

  6. Чтобы отредактировать другой текст в рамке, нужно сначала выделить всю рамку целиком, а затем щелкнуть текст, который требуется изменить, и начать ввод. Возможно, потребуется нажать несколько раз, чтобы выделить текст.

  7. Щелкните Страница-1 в нижнем правом углу страницы, чтобы вернуться к документу.

Создание простого блока

Перетащите фигуру на страницу из окна Фигуры. Наведите на нее указатель мыши и не убирайте его, пока по краям фигуры не появятся четыре стрелки Изображение кнопки. Это стрелки автосоединения, с помощью которых вы сможете автоматически соединить фигуры несколькими разными способами.

  • Наведите указатель мыши на одну из стрелок, и появится мини-панель инструментов с четырьмя верхними фигурами из области «Экспресс-фигуры».

    Мини-панель инструментов «Автосоединение»
    Наберите указатель, чтобы просмотреть фигуру на схеме. Щелкните нужную фигуру, и она появится на схеме с соединительной линией между ней и первой фигурой.

  • Перетащите фигуру из окна Фигуры и удерживайте ее над имеющейся на странице фигурой, пока не появятся стрелки, после чего отпустите фигуру над одной из стрелок.

    Перетаскивание фигуры на стрелку автосоединения

Перетаскивание фигуры на стрелку автосоединения

  • Наведите указатель мыши на фигуру и удерживайте, пока не появятся стрелки. Затем щелкните стрелку, перетащите ее на фигуру, соединение с которой нужно создать, и отпустите над центром фигуры.

Примечание: Некоторые шаблоны поддерживают и другие удобные способы добавления и соединения фигур. Например, в шаблоне организационной диаграммы можно перетаскивать фигуры подчиненных на фигуру руководителя, чтобы автоматически сформировать его структуру отчетности.

Добавление текста к фигурам

Щелкните фигуру и начните вводить текст. По завершении ввода текста щелкните в пустом месте страницы или нажмите клавишу ESC.
Добавление текста в фигуру

Добавьте таким же способом текст для соединительной линии. Нажав ESC или щелкнув страницу, снова выберите соединительную линию, и вы заметите, что в тексте появился небольшой прямоугольник — это маркер для перемещения текстового блока. Щелкните его и перетащите вверх, вниз или в сторону от соединительной линии.

Перемещение текста на фигуре

На ленте >«> блок текста Блок текста«, перейдите к фигуре с текстом и перетащите текст. Вернусь и нажмите кнопку «Главная>инструменты > указатель Выделение объектов , когда вы закончили перемещение текста.

Изменение шрифта, размера и прочих параметров форматирования

Выделите фигуру с текстом. Используйте для форматирования текста инструменты в группах Шрифт и Абзац на вкладке Главная.

Оформление схемы

Создав схему Visio, вы можете изменить ее внешний вид.

Цвет и прочие виды форматирования

На вкладке Конструктор в группе Темы осторожно наводите указатель мыши на различные темы. Каждая тема добавляет на схему различные цвета и эффекты. Выберите любую тему и щелкните ее.

Добавление фона на Visio схему

Выберите Конструктор > Фон > Фон. Выберите один из вариантов фона.

Теперь поищите внизу, под страницей. Там есть две вкладки: Страница-1 и Фон Visio 1. Вкладка Страница-1 открывает страницу с фигурами, а Фон Visio 1 — только что добавленную фоновую страницу. Щелкните вкладку Фон Visio 1, чтобы видеть только фон, а затем нажмите на вкладку Страница-1, чтобы вернуться к схеме.

Вкладка фона в Visio

Применение границы или заголовка к схеме Visio рисунка

Выберите вкладку Конструктор > Фон > Рамки и заголовки. Выберите один из вариантов и добавьте его в схему.

Рамки и заголовок добавляются на фоновую страницу, поэтому если нужно добавить заголовок, откройте вкладку фоновой страницы. Выберите пункт Заголовок и начните вводить текст. Заголовок изменится. Завершив ввод, откройте вкладку Страница-1, чтобы вернуться к схеме.

Поиск и применение шаблона

Visio 2010 позволяет применять встроенные шаблоны, применять собственные и искать шаблоны из множества шаблонов, доступных на Office.com. Office.com предлагает широкий выбор популярных шаблонов Excel.

Чтобы найти и применить шаблон в Visio, сделайте следующее:

  1. На вкладке Файл нажмите кнопку Создать.

  2. В области «Выбор шаблона»сделайте одно из следующего:

    • Чтобы использовать один из встроенных шаблонов, в категории «Категории шаблонов» выберите категорию, а затем щелкните нужный шаблон и нажмите кнопку «Создать».

    • Чтобы повторно использовать шаблон, который вы недавно использовали, в меню «Недавно использованные шаблоны» выберите нужный шаблон и нажмите кнопку «Создать».

    • Чтобы использовать ранее созданный шаблон, в меню «Другие способы начать работу» выберите «Создать из существующего», перейдите к нужному файлу и нажмите кнопку «Создать».

    • Чтобы найти шаблон на сайте Office.com, в области «Другие способы начала работы» щелкните Office.com, выберите нужный шаблон и нажмите кнопку «Скачать», чтобы скачать шаблон из Office.com на свой компьютер.

Примечание: Вы также можете искать шаблоны на Office.com visio. Чтобы найти шаблоны на Office.com, в области «Другие способы начала работы» щелкните Office.comшаблоны. В поле Office.com поиска шаблонов введите одно или несколько условий поиска, а затем нажмите кнопку со стрелкой.

Создание новой схемы

  1. Откройте вкладку Файл. Откроется представление Backstage.

    Примечание: При первом открыть Visio вы находитесь в представлении Backstage. Если вы только что открыли Visio, пере переходите к следующему шагу.

  2. Нажмите кнопку Создать.

  3. В области «Выберите шаблон» вобласти «Другие способы начала работы» щелкните«Пустой чертеж».

  4. Щелкните Создать.

Когда шаблон схемы откроется, большую часть места будет взята пустая страница схемы. Сбоку находится окно «Фигуры», которое содержит несколько наборов, в которых фигуры заполнены.

Набор элементов ''Отдел'' в окне ''Фигуры''

В верхней части окна «Фигуры» находятся заголовки. возможно, потребуется прокрутить заголовок панели, чтобы увидеть их все. Если щелкнуть заголовок панели, фигуры появятся в области ниже.

Открытие схемы

  1. Откройте вкладку Файл и нажмите кнопку Открыть.

  2. В левой области диалогового окна «Открытие» щелкните диск или папку с документом.

  3. В правой области диалогового окна «Открытие» откройте папку с нужным документом.

  4. Щелкните рисунок и нажмите кнопку «Открыть».

Сохранение схемы

Схему можно сохранить в виде стандартного файла Visio, которым можно поделиться с другими людьми, у которых есть Visio. Кроме того, схему можно сохранить в различных форматах непосредственно в диалоговом окне «Сохранить как».

  1. Откройте вкладку Файл.

  2. Нажмите кнопку «Сохранитькак» и выберите формат в списке типов «Сохранить как».

Различные форматы полезны для различных способов использования схемы или совместного доступа к ее схемам.

  • обычный файл изображения,    в том числе в форматах JPG, PNG и BMP;

  • Веб-страница    в формате HTM. Файлы изображений и другие файлы ресурсов сохраняются во вложениях в том месте, где вы сохраняете HTM-файл.

  • PDF- или XPS-файл;   

  • Чертеж AutoCAD     в формате DWG или DXF.

Добавление фигуры

  1. В окне «Фигуры» щелкните и удерживайте фигуру.

  2. Перетащите фигуру на страницу схемы.

Дополнительные сведения о том, как добавлять фигуры, см. в окне «Фигуры» для у упорядочительного и поиска фигур, а также в области «Дополнительные фигуры и ветвии».

Добавление соединителю между двумя фигурами

Чтобы добавить на страницу чертежа фигуру, которая будет автоматически соединена при ее добавлении на страницу, сделайте следующее:

  1. Перетащите первую фигуру на страницу.

  2. Наберите указатель на фигуре, которая уже находится на странице. Обратите внимание на то, что по четырех сторонам фигуры появляются маленькие синие стрелки. Это стрелки автосоединения, которые можно использовать для соединения фигур.

    Фигура со стрелками автосоединения

    Фигура «Запрос на обслуживание» со стрелками автосоединения

  3. Перемещайте указатель, чтобы охватить одну из стрелок.

    Появится мини-панель инструментов с четырьмя фигурами, а на странице также может появиться фигура предварительного просмотра. При надвижении указателя на фигуры на мини-панели инструментов отображаются предварительные просмотры фигур. Фигуры на панели инструментов — это четыре верхние фигуры из области «Быстрые фигуры».

  4. Щелкните одну из фигур на мини-панели инструментов, чтобы добавить ее на страницу.

Чтобы автоматически соединять две фигуры при перетаскивания второй фигуры на страницу, сделайте следующее:

  1. Перетащите одну фигуру на страницу.

  2. Перетащите вторую фигуру на страницу и удерживайте ее, чтобы она охватывает первую фигуру, но не перетаскивать ее. Обратите внимание на стрелки автосоединения.

    Соединение фигур путем перетаскивания одной из них на стрелку автосоединения другой

    Фигура «Анализ» находится на нижней стрелке автосоединения на фигуре «Запрос на обслуживание».

  3. Переместить вторую фигуру вниз по стрелке автосоединения, которая указывает в нужном направлении, и передвинуть ее на стрелку.

    Две соединенные фигуры

    Фигура «Анализ» находится на стандартном расстоянии от фигуры «Запрос на обслуживание» и автоматически соединена.

Чтобы соединить две фигуры, которые уже находятся на странице, сделайте следующее:

  1. Наденьйте указатель на одну из фигур, которые вы хотите соединить.

  2. Когда появятся стрелки автосоединения, наводя указатель на стрелку, указываемую на другую фигуру, с которую нужно соединиться.

  3. Щелкните стрелку автосоединения и, удерживая ее нажатой, перетащите соедините дальше к центру другой фигуры.

    Когда стрелка находится над центром другой фигуры, вокруг нее появляется красная граница. Отложите соединителю, чтобы прикрепить ее, или «приклейте» ее к фигуре.

Дополнительные сведения о том, как соединять фигуры, см. в теме «Добавление соединители между фигурами в Visio».

Добавление текста в фигуры или на страницу

Добавление текста в фигуру

  1. Выберите фигуру, в которую вы хотите добавить текст.

  2. Введите нужный текст.

    При вводе выделенная фигура переключится в режим редактирования текста. Чтобы добавить еще одну строку текста, нажмите ввод.

  3. Щелкните пустую область на странице или нажмите клавишу ESC.

  4. Снова выберем фигуру. В области текста появится небольшой желтый control handle. Перетащите желтый control handle, чтобы переместить текст.

Добавление текста на страницу

  1. На вкладке «Главная» в группе «Инструменты» выберите инструмент «Текст».

  2. Щелкните пустую область на странице. Появится текстовое поле.

  3. Введите нужный текст.

  4. На вкладке «Главная» в группе «Инструменты» нажмите кнопку «Указатель», чтобы прекратить использование инструмента «Текст».

Текстовое поле теперь будет иметь свойства других фигур. Можно выделить это поле и изменить текст, перетащить поле в другую часть страницы или отформатировать текст с помощью групп Шрифт и Абзац на вкладке Главная. Кроме того, при наводе указателя на текст появляются стрелки автосоединения, с помощью которые можно соединить текст с другими фигурами.

Дополнительные сведения о добавлении текстовых блоков см. в документе «Добавление, изменение, перемещение и поворот текста и текстовых блоков».

Добавление данных в фигуру

Чтобы ввести данные в свойство или поле данных, уже есть у фигуры, сделайте следующее:

  1. Выберите фигуру на странице.

  2. Щелкните фигуру правой кнопкой мыши и выберите «Данные фигуры».

  3. В строке нужного свойства введите нужные данные в окне «Данные фигуры».

Чтобы определить новое свойство или поле данных для фигуры, сделайте следующее:

  1. Выберите фигуру на странице.

  2. Щелкните фигуру правой кнопкой мыши и выберите «Определить данные фигуры».

  3. В диалоговом окне «Определение данных фигуры» нажмите кнопку «Новое»

  4. В поле «Надпись» удалите текст по умолчанию и введите имя свойства.

  5. В списке «Тип» выберите тип данных, которые нужно ввести в это свойство.

    Совет: Если вы хотите, чтобы свойство принимает текст (например, имя человека) в качестве типа данных, выберите «Строка».

  6. В поле «Значение» введите значение для нужных данных.

  7. Нажмите кнопку ОК.

  8. Снова щелкните фигуру правой кнопкой мыши, найдите пункт «Данные»,а затем выберите пункт «Данные фигуры».

Откроется окно «Данные фигуры» со всеми данными, определенными для фигуры. Если все фигуры содержат определенные сведения, можно оставить окно «Данные фигуры» открытым и щелкнуть фигуры, которые вас интересуют, чтобы увидеть содержащиеся в них данные.

Соединение источников данных с фигурами

Добавление данных фигуры вручную может сделать схему более важной, но если данные есть в базе данных или книге Excel, вы можете автоматически добавить эти данные в схему и связать строки данных с определенными фигурами.

Мастер выбора данных используется для импорта данных в окно «Внешние данные».

Данные, которые появляются в окне «Внешние данные», являются моментальный снимок исходных данных на момент импорта. Вы можете обновить данные в чертеже в зависимости от изменений исходных данных, нажав кнопку «Обновить все» на вкладке «Данные».

  1. На вкладке Данные в группе Внешние данные нажмите кнопку Связать данные с фигурами.

  2. На первой странице мастера выбора данных выберите тип источника данных с данными, которые вы используете:

    • Microsoft Office книги Excel

    • Microsoft Office access

    • Список Windows SharePoint Services Майкрософт

    • База данных Microsoft SQL Server

    • другой источник данных OLEDB или ODBC;

  3. Завершите все работы мастера.

Когда вы нажмете кнопку «Готово» на последней странице мастера подключения к данным, появится окно «Внешние данные» с импортируемыми данными, показанными в сетке. Перетащите строку данных в фигуру, чтобы автоматически добавить их в данные фигуры. Или в окне «Фигуры» выберите фигуру, данные в которую вы хотите вдержать, а затем перетащите строку данных в пустую область страницы. Выбранная фигура будет добавлена на страницу, подключенную к данным.

Форматирование схемы

Чтобы применить фон к рисунку:

  1. Откройте вкладку Конструктор.

  2. В группе «Фон» нажмите кнопку «Фон».

  3. Щелкните нужный фон. В схему будет добавлена новая фоновая страница, которую можно увидеть на вкладке страницы в нижней части области схемы.

Чтобы применить границу или заголовок к рисунку:

  1. На вкладке «Конструктор» нажмите кнопку «& заголовки».

  2. Щелкните нужный заголовок.

    Заголовок и граница будут добавлены на фоновую страницу (фон VBackground-1 по умолчанию). Чтобы изменить заголовок и другой текст, необходимо внести изменения на фоновой странице. название на других страницах изменить нельзя.

  3. В нижней части области построения схемы щелкните вкладку Фон Visio-1.

    Вкладки страниц, включая страницу ''Фон Visio''

  4. Щелкните текст заголовка. Будет выбрана вся граница, но если вы начнете вводить ее, изменится текст заголовка по умолчанию.

  5. Введите нужный заголовок.

  6. Чтобы отредактировать другой текст в рамке, нужно сначала выделить всю рамку целиком, а затем щелкнуть текст, который требуется изменить, и начать ввод.

Чтобы применить единую цветовую схему и другие эффекты форматирования:

  1. На вкладке «Дизайн» в группе «Темы» наберите указатель на различные темы. На странице показано предварительное изображение темы.

    Чтобы увидеть другие доступные темы, нажмите кнопку » Кнопка "Дополнительно"«.

  2. Щелкните тему, которая будет применяться к схеме.

Слайд 1

Занятие № 7 Тема урока: « Подготовка к проверочной работе» Разработала мастера п/о: Топоркова Ирина Александровна

Слайд 2

Задание на урок Активизировать программу Visio. Создать новый документ и сохранить его Создание схем Переименовать страницу на Блок-схема Открыть трафареты для создания Блок-схемы Создать Блок-схемы согласно рисунка 1. Для создания блок-схем в категории шаблонов необходимо выбрать Business Process , а в подкатегории Basic Flowchart

Слайд 3

Рисунок 1

Слайд 4

6. Добавить новый лист и переименовать его на Схема метро 7.Создать Схему метро согласно рисунка 2 Для создания схемы метро в категории шаблонов необходимо выбрать Map , а в подкатегории Metro Shapes

Слайд 5

Рисунок 2

Слайд 6

8. Добавить новый лист и переименовать его на План дома В меню File выбрать Shapes  Building Plan  Walls, Shell and Structure Исходя из размеров квартиры — 14,1х10 м., выбрать свой размер страницы и масштаб: В меню File выбрать команду Page Setup . В закладке Page Size выбрать размер А3. В закладке Drawing Scale выбрать масштаб 1:50. Добавить панель инструментов View , включить инструмент Size & Position Window Добавить панель инструментов Snap & Glue , включить инструменты Toggle Snap и Snap to Alignment Box .

Слайд 7

Вставить на страницу документа фигуру Space . На панели Size & Position , ввести значение высоты и ширины по образцу:

Слайд 8

Области 6,7,8 необходимо выделить и с помощью контекстного меню нажать Union Выделить все фигуры. Из контекстного меню выбрать пункт Convert ti Walls . В диалоговом окне выбрать пункты: Wall , Delete Так как стена с окнами, расположенная сверху, является наружной, необходимо выделить и нажать клавишу Delete . Перетащить на страницу документа фигуру Exterior wall . На панели Size & Position , ввести значение длины – 14,1 м и установить взамен удаленной. Установить по плану окна – 1,8 м и двери – 1,0 × 0,15 м Вставить надпись. Выделить план квартиры. В меню View выбрать Layer Properties . В открывшемся ДО нажать New , ввести имя слоя Стены и нажать ОК . Для этого слоя в столбце Color установить галочку и в списке цветов выбрать коричневый, нажать Apply и ОК . Выделить план квартиры. В меню Format выбрать Layer и в открывшемся ДО установить галочку на вашем слое и нажать ОК .

Слайд 9

9. Добавить новый лист и переименовать его на Топологическая схема 10. Создать схему согласно рисунка 3 Для создания схемы метро в категории шаблонов необходимо выбрать Map , а в подкатегории Directional Map

Слайд 10

Рисунок 3

Слайд 11

Образы Road Shapes Образ Назначение Образ Назначение Прямая дорога Перекресток четырех дорог Плавная (круговая) дорога Круговая односторонняя транспортная развязка Мост Транспортная развязка типа «Клеверный лист» Закругление дороги Транспортная развязка по схеме «Ромб» Выгиб дороги Неровная непрямая «Петляющая дорога» Поворот дороги, перекресток дорог Прерывание шоссе; мостовой; проезжей части дороги Перекресток 3 дорог Узкая дорога, второстепенная дорога

Слайд 12

Для создания трассы Дон выбрать трафарет Road square Увеличьте длину дороги и измените ее направление, для этого переместите правый зеленый указатель вверх, согласно рисунка 3. Можно изменить ширину дороги, для этого нажмите ПК мыши и в появившемся КМ выбрать один из предлагаемых режимов: Thin Road (узкая дорога), Standard Road (стандартная дорога), Thick Road (широкая дорога), Custom (настраиваемая ширина). Если выбрать режим, то к форме добавляется еще желтый маркер, при помощи которого можно варьировать ширину дороги. Добавить встроенный текст

Слайд 13

Теперь нужно отразить на схеме поворот дороги. Для этого понадобится форма Curve 2 . Выделите в трафарете форму и перетащите ее на лист. Для этого установите указатель на мастер фигуры, нажмите ЛК мыши и, удерживая ее, перетащите мастер на лист. У добавленной фигуры Curve 2 имеются четыре маркера выделения. Маркеры указывают на границы площади, которую занимает фигура на листе, и служат для визуального управления линейными размерами фигуры. Чтобы пропорционально изменить размер фигуры, установите указатель мыши на любой из угловых маркеров, нажмите левую кнопку мыши и, удерживая ее, переместите маркер так, чтобы фигура приняла нужные размеры.

Слайд 14

Чтобы изменить текущий тип точки соединения, выполните следующие действия: Выделите фигуру, точки соединения которой нужно изменить. На Панели инструментов Стандартная ( Standard ) выбрать инструмент Точка соединения ( Connection Point Tool ), который размещается вместе с инструментами Соединитель ( Connector Tool ). Выделите точку соединения, тип которой нужно изменить. При попадании указателя мыши на точку соединения он примет вид крестика со стрелками. Щелкните ПК мыши и в КМ выбрать соответствующую команду: Внутрь ( inward ), Наружу ( outward ), Внутрь и наружу ( inward & outward ). Текущий тип соединения отмечен установленным флажком. Для данной схемы установите соединение Внутрь и наружу. Для изменения места расположения точки соединения выделите ее, нажмите ЛК мыши и, удерживая ее, переместите точку в нужное место.

Слайд 15

Для того чтобы добавить на лист маршрут туристического пути, представляющего собой извилистую и петляющую тропу, необходимо воспользоваться элементом Инструменты рисования , позволяющую создавать пользовательскую фигуру.

Слайд 16

Для того чтобы изменить форму кривой, ее следует сначала выделить. Для этого выб рать на панели инструментов Р исования инструмент Карандаш . Теперь на рисунке появились точки эксцентриситета Щелкните ЛК мыши по выбранной точке эксцентриситета. После этого маркер изменит свой цвет с зеленого на малиновый. Для одновременного управления несколькими точками эксцентриситета нажать клавишу Shift и, удерживая ее, выделить все необходимые точки. Нажать ЛК мыши и, удерживая ее, переместить точку эксцентриситета так, чтобы дуга приняла нужное направление.

Слайд 17

Для продолжения работы с изображением добавьте к имеющемуся рисунку линии. На панели инструментов Рисунок выберите инструмент Линия и нарисуйте те линии, которыми необходимо пояснить рисунок. После окончания рисования добавьте к линиям наконечники в виде стрелок. Для этого выделите линию, на панели инструментов Форматирование ( Formatting ) в раскрывающемся списке кнопки Line Edits выберите такой вид стрелки, как показано на рисунке. Для того чтобы добавить текст к стрелке, щелкните дважды на стрелке и введите в появившемся окне текст. Образы ориентиров

Слайд 18

Образы обозначений мест отдыха Образы дорожных знаков

Слайд 19

11. Показать выполненное задание мастеру 12. Закрыть документ

Слайд 20

Контрольные вопросы Назначение и основные приемы работы с Visio. Приведите примеры названий трафаретов и перечислите содержащиеся в них объекты. Перечислите основные операции при работе с документом: добавление новых шаблонов, вставка “образа”, графических объектов. Как добиться точности в расположении объектов по отношению к листу и друг другу? Какие для этого имеются инструменты? Как открыть новый рисунок с требуемым трафаретом? Опишите технологию копирования объектов Visio в рабочем поле. Перечислите возможности редактирования изображений Visio и опишите как они реализуются. Опишите варианты комбинирования фигур Visio. Как создается собственный стандартный объект Visio и как он помещается в трафарет? Как обеспечить «непрозрачное» наложение надписи Visio на графику? В чем смысл введения подложек и как они взаимодействуют с лицевыми страницами? Как осуществить печать документа и какие существуют режимы ?

Microsoft Visio 2010 — это приложение для создания диаграмм и схем, помогающее визуализировать, исследовать и распространять сложные данные. В Microsoft Visio сложные для понимания таблицы и текст можно преобразовать в наглядные доступные схемы.

Приложение Microsoft Visio содержит современные фигуры и шаблоны для создания самых разнообразных схем в таких областях, как управление ИТ-средой, моделирование процессов, строительство и архитектурное проектирование, разработка пользовательского интерфейса, управление кадрами, проектами и т. д.

Поиск и применение шаблона

В Microsoft Visio 2010 можно использовать встроенные шаблоны, создавать собственные и искать подходящие шаблоны на веб-сайте Office.com. На сайте Office.com представлен широкий набор популярных шаблонов Microsoft Visio, включая схемы процессов, схемы сетей и планы этажей зданий.

Чтобы найти и применить шаблон в приложении Microsoft Visio, выполните указанные ниже действия.

  1. На вкладке Файл выберите команду Создать.
  2. В разделе Выберите шаблон выполните одно из указанных ниже действий.
    • Чтобы использовать один из встроенных шаблонов, в разделе Категории шаблонов выберите нужную категорию и шаблон, а затем нажмите кнопку Создать.
    • Чтобы повторно использовать шаблон, выберите его в разделе Последние использовавшиеся шаблоны и нажмите кнопку Создать.
    • Чтобы использовать ранее созданный шаблон, в разделе Другие способы приступить к работе выберите пункт Из существующего документа, перейдите к нужному файлу и нажмите кнопку Создать новый.
    • Чтобы найти шаблон на сайте Office.com, в разделе Другие способы приступить к работе выберите пункт Шаблоны Office.com, затем — нужный шаблон и нажмите кнопку Загрузить, чтобы загрузить шаблон с сайта Office.com на компьютер.

Примечание. Шаблоны на сайте Office.com можно также искать прямо из Microsoft Visio. Для поиска шаблонов на сайте Office.com выберите в разделе Другие способы приступить к работе пункт Шаблоны Office.com. В поле Поиск шаблонов на Office.com введите одно или несколько условий поиска и нажмите кнопку со стрелкой.

Задание 1

  1. Откройте Microsoft Visio 2010 (Пуск — Все программы — Microsoft Office — Microsoft Visio 2010).
  2. Создайте документ на основе шаблона Простая схема. Для этого:
    • В разделе Категории шаблонов щелкните категорию Общие.
    • В выбранной категории щелкните шаблон Простая схема.
    • Нажмите кнопку Создать. 
  3. Закройте созданный документ.
  4. Создайте документ на основе шаблона Office.com Карта проблем. Для этого:
    • На вкладке Файл щелкните Создать.
    • В разделе Другие способы приступить к работе щелкните пункт Шаблоны Office.com.
    • В поле Поиск шаблонов на Office.com впишите текст для поиска «схемы» и щелкните кнопку Начать поиск (см. Рис. 1.1).01_01sm[1]

      Рис. 1.1. Поиск шаблона Office.com

    • Среди найденных шаблонов щелкните Карта проблем.
    • Нажмите кнопку Загрузить. 
  5. Закройте созданный документ.
  6. Создайте документ на основе недавно использовавшего шаблона Простая схема. Для этого:
    • На вкладке Файл щелкните Создать.
    • В разделе Последние использовавшиеся шаблоны щелкните шаблон Простая схема.
    • Нажмите кнопку Создать. 
  7. Закройте созданный документ. 

Создание схемы

  1. На вкладке Файл выберите Создать.
  2. В разделе Выберите шаблон в группе Другие способы приступить к работе выберите вариант Новый документ.
  3. Нажмите кнопку Создать. 

Когда откроется шаблон схемы, большая часть пространства будет занята пустой страницей схемы. Рядом будет находиться окно Фигуры, содержащее различные наборы элементов с фигурами (см. Рис. 1.2).

01_02[1]

Рис. 1.2. Окно «Фигура»

Наборы элементов можно отличить по названиям в верхней части окна Фигуры; возможно, чтобы просмотреть все наборы элементов, нужно будет прокрутить область названий. Если щелкнуть название набора элементов, фигуры из этого набора появятся в области ниже.

Для добавления набора элементов в окно Фигуры выполните действия.

  1. В окне Фигуры щелкните Дополнительные фигуры.
  2. В открывшемся списке наведите мышь на название категории нужного набора элементов, затем щелкните название набора элементов. 

Выбранный набор элементов появится в окне Фигуры.

Задание 2

  1. Создайте новый документ. Для этого:
    • На вкладке Файл выберите Создать.
    • В разделе Другие способы приступить к работе щелкните Новый документ.
    • Нажмите кнопку Создать. 
  2. Отобразите в окне Фигуры следующие наборы элементов: Фигуры схемы аудитаОбщие блокиПростые фигурыФигуры временной шкалы. Для этого выполните действия:
    • В окне Фигуры щелкните Дополнительные фигуры.
    • В открывшемся списке наведите мышь на название категории нужного набора элементов, затем щелкните название набора элементов:
      • Бизнес — Бизнес-процесс — Фигуры схемы аудита;
      • Общие — Общие блоки;
      • Общие — Простые фигуры;
      • Расписания — Фигуры временной шкалы.  
  3. Просмотрите фигуры каждого набора элементов. Для этого в окне Фигуры щелкните название набора и просмотрите список фигур.
  4. Измените вид отображения фигур набора Фигуры схемы аудита на Значки и данные. Для этого:
    • Щелкните называние набора Фигуры схемы аудита правой кнопкой мыши.
    • В открывшемся контекстном меню выберите Вид — Значки и данные. 
  5. Закройте наборы элементов Фигуры временной шкалы и Блоки. Для этого:
    • Щелкните название набора правой кнопкой мыши.
    • В открывшемся контекстном меню выберите Закрыть.

Добавление фигуры на схему

  1. В окне Фигуры щелкните нужную фигуру, удерживайте нажатой кнопку мыши.
  2. Перетащите фигуру на страницу схемы.

Задание 3

  1. Перетащите на страницу схемы фигуры (см. Рис. 1.3):
    • Оконченная фигура (набор элементов Фигуры схемы аудита);
    • Прямоугольник (набор элементов Экспресс-фигуры);
    • Ручной ввод (набор элементов Фигуры схемы аудита);

    01_03sm[1]

    Рис. 1.3. Добавление фигуры на схему

  2. Уменьшите размеры прямоугольника, используя размерные маркеры (см. Рис. 1.4).01_04[1]

    Рис. 1.4. Изменение размера фигуры

  3. Измените цвет заливки прямоугольника на белый. Для этого:
    • Выделите прямоугольник (щелкните по нему левой клавишей мыши).
    • На вкладке Главная в группе Фигура щелкните кнопку со списком Заливка.
    • В открывшемся списке вариантов заливок выберите белый цвет. 
  4. Выровняйте центры фигур по вертикали. Для этого:
    • Выделите все фигуры, щелкнув на вкладке Главная в группе Редактирование кнопку со списком Выделить иВыделить все.
    • На вкладке Главная в группе Упорядочить щелкните кнопку со списком Положение и выберите Выровнять по центру. 
  5. Выровняйте интервалы между фигурами. Для этого:
    • Выделите все фигуры (если они еще не выделены), щелкнув на вкладке Главная в группе Редактирование кнопку со списком Выделить и Выделить все.
    • На вкладке Главная в группе Упорядочить щелкните кнопку со списком Положение и выберите Интервалы между фигурами — Распределить по вертикали.

Добавление соединителя между двумя фигурами

Чтобы соединить две фигуры на схеме выполните указанные ниже действия.

  1. На вкладке Главная в группе Сервис щелкните кнопку Соединительная линия.
  2. Наведите указатель мыши на точку соединения фигуры (синий крестик на стороне фигуры), от которого должна быть построена соединительная линия, точка соединения будет выделена в красный квадратик.
  3. Прижмите левую клавишу мыши.
  4. Протащите линию до точки соединения второй фигуры, к которой должна быть проведена линия.
  5. Отпустите клавишу мыши.

Задание 4

Соедините друг с другом фигуры схемы, созданные в ходе выполнения задания 3 (см. Рис. 1.5).

01_05[1]

Рис. 1.5. Соединение фигур на схеме

Для этого:

  1. На вкладке Главная в группе Сервис щелкните кнопку Соединительная линия.
  2. Соедините Оконченную фигуру и Прямоугольник. Для этого:
    • Наведите указатель мыши на нижнюю точку соединения Оконченной фигуры (точка соединения должна быть выделена в красный квадратик).
    • Прижмите левую клавишу мыши.
    • Протащите линию до верхней точки соединения Прямоугольника (точка соединения должна быть выделена в красный квадратик).
    • Отпустите клавишу мыши.
  3. Аналогичным образом соедините Прямоугольник и фигуру Ручной ввод.

Добавление текста в фигуры или на страницу

Добавление текста в фигуру

  1. Выделите фигуру, в которую нужно добавить текст.
  2. Введите нужный текст.
  3. Как только будет начат ввод, Microsoft Visio переключит выделенную фигуру в режим редактирования текста. Чтобы добавить еще одну строку текста, нажмите клавишу [ENTER].
  4. После завершения ввода щелкните пустую область на странице или нажмите клавишу [ESC].
  5. Снова выделите фигуру. В области текста появится маленький желтый управляющий маркер. Перетащите этот маркер, чтобы переместить текст. 

Добавление текста на страницу

  1. На вкладке Главная в группе Сервис выберите инструмент Текст.
  2. Щелкните пустую область на странице, после чего появится текстовое поле.
  3. Введите нужный текст.
  4. Чтобы завершить работу с инструментом Текст, на вкладке Главная в группе Сервис выберите инструмент Указатель.

Теперь текстовое поле имеет те же характеристики, что и другие фигуры. Можно выделить это поле и изменить текст, перетащить поле в другую часть страницы или отформатировать текст с помощью групп Шрифт и Абзац на вкладке Главная.

Задание 5

  1. Добавьте текст в фигуры (см. Рис. 1.6).
    • В Оконченную фигуру — Управление внутренними аудитами предприятия.
    • В Прямоугольник — Разработка и корректировка программы внутренних аудитов предприятия на год.
    • В фигуру Ручной ввод — Назначение ведущего аудитора и группы аудита для проведения текущих аудитов.

    01_06[1]

    Рис. 1.6. Добавление текста в фигуру

    Для этого:

    • На вкладке Главная в группе Сервис выберите инструмент Указатель.
    • Щелкните фигуру, в которую добавляется текст.
    • Введите текст с клавиатуры.
    • Измените размер шрифта или фигуры так, чтобы текст хорошо размещался внутри фигуры.
  2. Добавьте на страницу текст «Начальник отдела качества» (см. Рис. 1.7). Для этого:
    • На вкладке Главная в группе Сервис выберите инструмент Текст.
    • Щелкните пустую область страницы для размещения текста слева от фигуры Прямоугольник.
    • Введите текст с клавиатуры.
    • Отформатируйте текст.
    • Закончите работу с инструментом Текст, выбрав инструмент Указатель.
    • Скопируйте текстовый блок и расположите его напротив фигуры Ручной ввод.

01_07[1]

Рис. 1.7. Добавление текста на страницу

Форматирование схем

Чтобы добавить фон в документ, выполните указанные ниже действия.

  1. Откройте вкладку Конструктор.
  2. В группе Подложки нажмите кнопку Подложки.
  3. Выберите нужную подложку. В схему будет добавлена новая фоновая страница (по умолчанию этой странице присваивается имя Фон Visio-1), которую можно просмотреть на вкладках страниц в нижней части области построения схемы (см. Рис. 1.8).01_08[1]

    Рис. 1.8. Вкладки страниц

Чтобы переименовать вкладку страницы выполните указанные ниже действия.

  1. Щелкните правой клавишей мыши по переименовываемой вкладке.
  2. В открывшемся контекстном меню выберите команду Переименовать.
  3. Введите название вкладки. 

Или

  1. Выполните двойной щелчок мышью по названию переименовываемой вкладки.
  2. Введите название вкладки. 

Чтобы добавить в документ рамку или заголовок, выполните указанные ниже действия.

  1. На вкладке Конструктор выберите команду Рамки и заголовки.
  2. Щелкните нужный заголовок. 

Заголовок и рамка будут добавлены на страницу фона (по умолчанию этой странице присваивается имя Фон Visio-1). Чтобы изменить заголовок, необходимо внести изменения на странице фона.

  1. В нижней части области построения схемы щелкните вкладку Фон Microsoft Visio-1 (см. Рис. 1.8).
  2. Щелкните текст заголовка. При этом будет выделена вся рамка, но если начать ввод, будет изменяться текст заголовка по умолчанию.
  3. Введите нужный заголовок.
  4. Чтобы отредактировать другой текст в рамке, нужно сначала выделить всю рамку целиком, а затем щелкнуть текст, который требуется изменить, и начать ввод. 

Чтобы применить единую цветовую схему и другие эффекты форматирования к схеме, выполните указанные ниже действия.

  1. На вкладке Конструктор в группе Темы наведите указатель на различные темы. На странице появится тема в режиме предварительного просмотра.

    Чтобы просмотреть другие доступные темы, нажмите кнопку Дополнительно 01_08_1[1].

  2. Щелкните нужную тему, чтобы применить ее к схеме. 

Задание 6

  1. Для схемы, подготовленной при выполнении задания 5, задайте фон «Поток» голубого цвета. Для этого:
    • На кладке Конструктор в группе Подложки щелкните кнопку Подложки и выберите название добавляемого фонаПоток.
    • На кладке Конструктор в группе Подложки щелкните кнопку Подложки, выберите команду Цвет фона и голубой цвет в открывшемся списке цветов. 
  2. Переименуйте вкладки страниц:
    • Страница со схемой — Схема аудита;
    • Страница подложки — Фон. 

    Для переименования вкладки страницы выполните по ней двойной щелчок мышью и введите нужное название.

  3. Сформируйте рамки и заголовки страниц, используя схему «Эркер». Для этого:
    • На вкладке Конструктор в группе Подложка щелкните кнопку Рамки и заготовки.
    • Выберите схему «Эркер».
    • Щелкните вкладку подложки Фон и измените заголовок: Схема внутреннего аудита предприятия.
    • Примените к схеме тему «Простая тень», выбрав ее на вкладке Конструктор в группе Темы.

Печать схемы

  1. Откройте вкладку Файл и выберите команду Печать.
  2. Чтобы вывести схему на печать, нажмите кнопку Печать.
  3. В диалоговом окне Печать выполните указанные ниже действия.
    • В поле Имя выберите нужный принтер (если он еще не выбран).
    • В группе Страницы укажите диапазон страниц документа для печати.
    • В поле Число копий укажите количество копий, которые нужно напечатать. 
  4. Настроив все параметры печати, нажмите кнопку ОК.

Сохранение схемы

Можно сохранить схему как обычный файл Microsoft Visio и работать над ним вместе с другими пользователями, на компьютере которых установлено приложение Microsoft Visio. Кроме того, при сохранении схемы можно выбрать один из множества других форматов непосредственно в диалоговом окне Сохранить как.

  1. Откройте вкладку Файл.
  2. Выберите команду Сохранить как, а затем выберите нужный формат в списке Тип файла. 

В зависимости от того, как планируется использовать схему и организовать совместную работу с ней, могут потребоваться разные форматы:

  • обычный файл изображения, в том числе в форматах JPGPNG и BMP;
  • веб-страница в формате HTM (файлы изображений и другие файлы ресурсов сохраняются во вложенной папке в том же расположении, в котором сохранен HTM-файл);
  • PDF- или XPS-файл;
  • чертеж AutoCAD в формате DWG или DXF.

 Задание 7

  1. Сохраните схему, подготовленную при выполнении задания 6, в папке Документы в формате Документ (.vsd) под именемСхема внутреннего аудита. Для этого:
    • На вкладке Файл щелкните Сохранить.
    • Выберите папку Документы для хранения схемы.
    • Проверьте установленный тип файла Документ (.vsd).
    • Введите имя файла Схема внутреннего аудита.
    • Щелкните кнопку Сохранить. 
  2. Сохраните подготовленную схему в папке Документы в формате PDF под тем же именем. Для этого:
    • На вкладке Файл щелкните Сохранить как.
    • Выберите папку Документы.
    • Задайте тип файла — PDF (.pdf).
    • Щелкните кнопку Сохранить. 
  3. Закройте Microsoft Visio.

 Открытие схемы

  1. На вкладке Файл выберите команду Открыть.
  2. В левой области диалогового окна Открыть выберите диск или папку с документом.
  3. В правой области диалогового окна Открыть откройте папку, содержащую нужный документ.
  4. Щелкните документ и нажмите кнопку Открыть.

Задание 8

  1. Откройте Microsoft Visio (Пуск — Все программы — Microsoft Office — Microsoft Visio 2010).
  2. Откройте файл Схема внутреннего аудита.vsd (Файл — Открыть…).
  3. Внесите изменения в схему (см. Рис. 1.9).
  4. Сохраните и закройте документ.

01_09sm[1]

Рис. 1.9. Измененная схема внутреннего аудита предприятия

Источник: http://www.intuit.ru

Министерство
образования и науки РФ

Федеральное
государственное бюджетное образовательное

учреждение
высшего образования

«Тульский
государственный университет»

Политехнический
институт

Кафедра
«Технология машиностроения»

по
дисциплине

Информатика-1

Направление
подготовки: 15.03.04 Автоматизация
технологических процессов и производств

Профиль
подготовки: Автоматизация технологических
процессов и производств в машиностроении

Формы
обучения:
очная

Тула
2015 г.

Методические
указания к лабораторным работам
составлены доц. А.В. Анцевым
и
обсуждены на заседании кафедры «Технология
машиностроения»
политехнического
института

протокол
№1 от «28» августа 2015 г.

Зав.
кафедрой________________А.А. Маликов

Методические
указания к лабораторным работам
пересмотрены и утверждены на заседании
кафедры «Технология машиностроения»
политехнического
института

протокол
№___ от «___»____________ 20___ г.

Зав.
кафедрой________________А.А. Маликов

Оглавление

Оглавление 3

1.Цели и
задачи работы 5

1.1 Поиск
и применение шаблона 5

1.2 Создание
схемы 6

1.3
Добавление фигуры на схему 7

1.4
Добавление соединителя между двумя
фигурами 8

1.5
Добавление текста в фигуры или на
страницу 8

Добавление
текста в фигуру 8

Добавление
текста на страницу 9

1.6
Форматирование схем 9

1.7
Сохранение схемы 10

2.Стандартные
фигуры 11

2.1 Изменение
размера, поворот, перемещение, управление
поведением фигуры 12

3.Параметры
страницы, масштаб, линейка, сетка,
направляющие 13

3.1 Параметры
страницы 13

3.2 Масштаб
страницы 13

3.3 Линейка
и сетка 14

3.4
Направляющие 14

3.5
Использование подсказки «Автосоединение»
для соединения фигур 14

3.6
Добавление фигуры при помощи мини-панели
фигур 15

3.7
Соединение фигур 15

4 Работа
с группами 18

5 Простая
блок-схема 18

5.1 Нумерация
фигур в блок-схеме 22

5.2 Изменение
расположения соединенных фигур 23

6 Диаграммы
и графики 24

7
Организационная диаграмма 27

8 Схема
причинно-следственных связей 28

9 План
этажа, план рабочих мест 29

10 Работа
со слоями 32

11 Создание
шаблона 33

12 Построение
произвольных рисунков 33

13 Объекты
исследования, оборудование, материалы
и наглядные пособия 34

14 Задание
на работу 34

15 Ход
работы 34

16 Содержание
отчета 34

17 Список
использованных источников 34

  1. Цели и задачи работы

Целью
данной лабораторной работы является
получение студентами навыков работы в
приложениях для создания схем и диаграмм
(Microsoft Visio, LibreOffice
Draw,
OpenOffice
Draw
и похожие), которые пригодятся в течении
всего обучения и в будующей профессиональной
деятельности.

Microsoft
Visio­ — это приложение для создания
диаграмм и схем, помогающее визуализировать,
исследовать и распространять сложные
данные. В Microsoft Visio сложные для понимания
таблицы и текст можно преобразовать в
наглядные доступные схемы.

Приложение Microsoft
Visio содержит современные фигуры и шаблоны
для создания самых разнообразных схем
в таких областях, как управление
ИТ-средой, моделирование процессов,
строительство и архитектурное
проектирование, разработка пользовательского
интерфейса, управление кадрами, проектами
и т. д.

Соседние файлы в папке МУ_ЛР_Информатика

  • #
  • #
  • #
  • #
  • #
  • #

Microsoft Visio — Overview

Computer diagramming is the process of creating scalable diagrams on a PC that can be used in various applications such as layout design, organization charts, timelines, floor plans and even prototype software user interfaces. Diagrams are made of shapes, objects and stencils, which when combined together correctly, can help project a lot of useful information.

Modern computer diagramming relies on using vector-based shapes instead of raster shapes. Raster shapes or bitmaps do not scale well, and their resolution and quality deteriorates with every edit. However, vector shapes are mathematical representations of a shape and hence scale well. Vector shapes are not affected by edits and are the most appropriate to use when precise measurements are required.

Computer diagramming can be shape-based artwork or more complex drafting often seen in CAD (Computer Aided Design) programs. CAD contains a lot more information such as the materials, processes, and specific conventions of the diagram. Shape-based artwork is more commonly used to depict lesser technical information.

Popular Diagramming Software

Microsoft Visio is the most popular diagramming software, however, there are alternatives that are often as good and in some cases, free. For simple diagramming requirements, the following tools should work just fine.

Gliffy

Gliffy is a popular online diagramming tool. Gliffy supports floor plans, venn diagrams, flow charts, network diagrams, etc. and is compatible with most modern web browsers. Gliffy can import Microsoft Visio documents and integrate with Google Drive to enable saving documents in the cloud and easy collaboration.

Gliffy

There are many themes and templates to choose from, making Gliffy a solid online alternative to Visio. Gliffy can be used freely for up to 5 diagrams or 2 MB file size. There are monthly plans that can be purchased depending on the number of diagrams needed.

yEd

yEd is an open-source free diagramming tool that runs on virtually any Java enabled platform. It can import Visio documents and work with very complex diagrams such as biological pathways.

yEd has automatic layouts and support for most graphical standards making it a viable alternative to Visio for anyone looking to create diagrams for free. There is also an online version called yEd Live that works in any modern HTML5 compatible web browser.

yEd

CADE

CADE works great for networking diagrams and as a 2D vector graphics editor for Windows. CADE is free to download and supports most of Visio’s basic functionalities. It is optimized for large CAD drawings and allows easy collaboration and sharing. CADE can be exported to popular formats such as EMF, JPG, PDF and XAML. There are many sample diagrams and templates to help you get started as well.

CADE

OmniGraffle

Visio is not available for Mac OS leaving OmniGraffle as the only premium alternative for Mac users. OmniGraffle is a comprehensive diagramming software that can create visually appealing designs at a significantly cheaper price than Visio. It supports importing Visio documents and exporting to a ton of popular formats including SVG. There are extensive options for stencils, canvases, templates, and objects allowing to easily create wireframe diagrams, trees, floor plans, and a whole lot more.

OmniGraffle

The latest version supports scripting in AppleScript or JavaScript to automate almost every aspect of the software. It also supports Touch Bar on the latest MacBooks. The Standard version of OmniGraffle retails for $99.99, while the Pro version retails for $199.99.

Introduction to Microsoft Visio

Microsoft Visio is one of the most popular diagramming software that empowers diagramming, data visualization, and process modelling in a familiar interface. Visio comes with an array of templates and built-in shapes that allow creating virtually any diagram of any complexity. Visio also allows users to define their own shapes and import them into the drawing.

Visio has been more of an enterprise-class software as home users rarely would need to use the advanced diagramming functions in Visio. However, many home users are purchasing the Standard edition of Visio to better visualize simple diagrams such as family trees or floor layout plans.

Visio owes its success in the enterprise due to its tight integration with other Microsoft Office products such as Word, Excel, and Access. Data can be directly imported from these softwares and converted into meaningful diagrams, which change in real-time in accordance with the data. For example, an Excel spreadsheet might have information about current flows through an electrical line. Visio can be used to diagrammatically represent this and whenever the Excel data gets updated, the same will be reflected in the Visio diagram as well.

Newer versions of Visio from Visio 2013 onwards support .vsdx format that allows enhanced compression and many other features compared to the older .vsd format supported by Visio 2010 and earlier versions. Visio can be purchased standalone in two versions — a Standard version, which retails for $299, and a Professional version, which retails for $589.99. The latest version of Visio can also be purchased as part of the Office 365 subscription with access to the online Visio viewer as well. Getting Visio as part of Office 365 is the best choice in order to keep up-to-date with the latest features and enhancements.

MS Visio — New Features

Visio being part of the Office 365 suite, is updated continuously throughout the year. If you have a qualifying Office 365 subscription, you are entitled to regular updates automatically. Users who purchase the standalone versions of Visio do not however, receive feature updates and must upgrade separately to a higher version when released.

The most recent update of Visio 2016 Professional (Office 365 version) has the following new features −

Data Visualizer

Data Visualizer helps in automatically creating process diagrams from Excel data. Premade or custom Excel templates containing information that fit into diagrams can be imported directly into Visio using the Data Visualizer and transformed into a Visio diagram. Any changes made to the original Excel file reflects in the Visio diagram as well.

Visualize Database Structures From Source Data

The latest version of Visio enables reverse engineering of databases to create a visual representation of the database. Visio can connect to various databases such as MySQL, SQL Server, Oracle, etc. and can update the diagrams in sync with the changes in the database.

Templates for Industry Specific Diagrams

The latest update to Visio for Office 365 comes with many new standardized templates catering to industries such as business processes, software development, IT and education. These templates are supplied by both Microsoft and other third parties extending the capabilities of Visio 2016.

Visio Online and Visio on iPad

Visio diagrams stored on SharePoint or OneDrive for business can now be opened for review in any modern web browser with Visio Online available with Office 365 or in the free Visio Viewer app for the iPad.

Microsoft Visio — User Interface

In this chapter, we will learn about the user interface in Visio. It is important to properly understand the user interface to get the most out of this tool.

Start Screen

The user interface of Visio is similar to that of other programs in the Office suite. You will be greeted with a Start page that lists some of the recent documents you have opened along with featured templates for creating common diagram types.

You can also search for templates on the Microsoft website right from the Start screen.

User Interface

The top right corner shows the Microsoft account you are connected to, if you are an Office 365 subscriber.

Apart from the featured templates, you can also click Templates to browse through the template categories.

Document Interface

Clicking any of the above templates opens the template document.

The document interface of Visio is similar to other Office programs such as Word or Excel. On the top, you have the Quick Access toolbar, which contains common commands, such as Save, Undo, and Redo. This can be customized as needed.

Below the Quick Access toolbar is the familiar Office Ribbon. The Home tab lists common commands for working with the document. We will learn more about other tabs as we go along.

On the left-hand pane, there is Shapes, which lists the common shapes that go well with the template. To insert a shape, just click and drag the shape onto the canvas. There are many shapes available in Visio and we will get more familiar with them as we move ahead.

Of course, you can also search for more shapes, if needed online, using the built-in search tool.

Template Document

Document Interface

When you place shapes onto the canvas, you will see guides that help you align the shapes with respect to the objects already on the canvas. You also have a ruler on the top and left of the canvas. This gives a sense of perspective and lets you create perfectly aligned diagrams.

Shapes in Visio are basically vector graphics and as such you can enlarge or shrink the size as needed without loss of quality. You also get an idea of the relative dimensions of all the other shapes (indicated by green arrows) when you try to change the dimensions of any shape.

Microsoft Visio — Opening Files

To open a file in Visio, go to the File menu, which opens the backstage view and click Open. The Recent section lets you directly access the recent drawings that you have opened or saved.

Based on your setup, the Open menu lists some of the file locations that you can browse for Visio drawings. Click Add a Place to add Office 365 SharePoint or OneDrive location for quick access. Alternatively, click Browse and select the Visio drawing from a local or network folder. Visio files have the extension .vsdx.

Open

Once you open a Visio drawing, you will see that the user interface changes according to the drawing.

In the following example, we have opened an org chart and you can observe that the shape stencils corresponding to the org chart are now available in the Shapes pane. In case of this file, you will also notice an Org Chart tab in the Ribbon that gives you additional options for working with the shapes in the chart, and also allows linking the shapes to data from external sources such as Excel.

Shapes to Data

You can adjust the spacing between individual shapes and also change the height and width of all shapes in one click.

Org Chart

You can customize the layout of this Org chart and add additional shapes, if needed.

The Compare command in the Organization Data section of the Org Chart tab lets you compare the contents of this org chart with another org chart or diagram open in Visio. The output is generated as an HTML file, which lists out the similarities and differences between the two diagrams.

Microsoft Visio — Customizing the UI

Visio’s UI is entirely customizable. You can show or hide elements in the UI to whatever suits you best.

The Quick Access Toolbar

The Quick Access Toolbar allows you to easily add often-used commands so that they are always available within reach. Apart from the standard Undo, Redo, and Save commands, you can add additional buttons, such as a toggle between Touch and Mouse mode depending on your display by clicking the arrow icon in the Quick Access Toolbar. You can also add more commands by clicking the option More Commands…

Quick Access Toolbar

The Ribbon

The Ribbon can be collapsed to allow more real estate for the canvas. You can reduce or expand the Shapes pane by clicking and dragging the edge of the pane inwards or outwards respectively.

The Ribbon can be customized just like the Quick Access Toolbar but to do so, you need to navigate to the File menu and click Options. Then click Customize Ribbon. You can select the tabs that you wish to display on the workspace. You can also create a new tab or group by clicking New Tab or New Group to accommodate the commands that you use frequently.

You can export these customizations and import them to a new instance of Visio by clicking the Import/Export dropdown menu and selecting Export Customizations.

Ribbon

Microsoft Visio — Changing View Modes

Visio has a few options for changing how you view the drawing. The View tab lists all the possible view options that you can use on the canvas. We will look at some of the commands that are useful in changing view modes.

Changing View Modes

Slide Snippets

The Slide Snippets Pane is available only in the latest Office 365 version of Visio. Basically, slide snippets allow you to directly export a Visio diagram as a PowerPoint slide.

To take a slide snippet, click the Slide Snippets Pane in the View tab to open it. Then, select an area of the drawing that you want to export to a PowerPoint slide and click the Add button in the Slide Snippets Pane. Add a title in the Enter title here… field and click Export to export the captured drawing to a PowerPoint slide.

Slide Snippets Pane

Presentation Mode

The Presentation Mode shows a full screen view of the drawing without any distractions. This mode can also be toggled by pressing F5 on the keyboard.

Ruler, Grid and Guides

You can toggle between showing the vertical and horizontal rulers, the grid, and the guides by toggling the corresponding checkboxes in the Show area of the View tab. The scaling of the rulers and grid can also be adjusted. The grid allows to easily snap objects so that they are placed correctly on the canvas.

Zoom

The Zoom section comprises of commands that allow you to change the zoom levels of the canvas. You can also fit the contents to window or adjust the contents to fill the page width.

Window

The Window section lists commands that allow to arrange multiple windows on your screen. You can directly open a new window or arrange windows side by side. You can also cascade windows for easy switching between them.

Creating and Arranging Smartshapes

SmartShapes provide contextual shapes which relate to the selected shape. SmartShapes are connected to the original shape and the connector also moves whenever the SmartShape is moved.

Creating a SmartShape

Start with a blank document (in this case a flowchart diagram). You will notice that the Shapes pane has different shapes that are applicable to flowcharts. Click and drag a shape onto the empty canvas. You can resize or rotate the shape as desired. You can even align the shape with the help of the alignment guides.

Shapes

When you drag a shape onto the canvas, you will notice that there are four arrows along the shape. Hovering over any of these arrows will show possible shapes that can be created and linked to this shape.

Placement Of Shape

Click the desired shape to create the shape. You will also notice that the shape is automatically connected to the initial shape. If you were to drag the shape manually, you will need to connect it manually as well. The connections between the shapes are dynamic and they will move in relation to the placement of the shape.

Arranging SmartShapes

The SmartShape arrow lists the first four shapes for the diagram that are seen in the Shapes pane. You might want to customize which shapes appear in the four SmartShape options depending on your workflow. To set the shapes that you prefer as SmartShapes, first select the desired shape in the Shapes pane and drag it to one of the first four shapes within the pane.

In this example, let us assume that the Database shape needs to be in the first four. Click and drag the Database shape into one of the first four positions.

Arranging SmartShapes

Now, when you create a SmartShape, you will find that the Database shape is made available.

Search Shapes

Microsoft Visio — Connecting Smartshapes

SmartShapes allows to automatically connect shapes. If you want to connect shapes that are not directly related, you can manually connect them.

To manually connect shapes, click the Connector tool in the Tools section of the Home tab. The mouse pointer now changes into a connector.

Connecting Smartshapes

Draw a connecting line from the originating shape to the destination. You will notice a dotted line representing the connector. You can either glue this connector to the connection point or glue it to the destination shape. Gluing it to the shape will enable you to move the shape to a different location on the canvas along with the connector.

Glue to Connection Point

Click the Pointer Tool in the Tools section of the Home tab to return the mouse pointer back to normal.

Microsoft Visio — Connected Smartshapes

Newer versions of Visio have built-in intelligence to help you place shapes between other shapes. Visio automatically adds the required spacing and connectors to ensure that the new shape is inserted in the correct position.

To insert a shape between two shapes, drag the new shape in between the desired shapes, till you see green squares on the connectors and release the mouse. The new shape will be inserted with equal spacing and appropriate connections.

If you delete the inserted shape, the connector extends all the way till the next shape.

Connected SmartShapes

Microsoft Visio — Aligning Smartshapes

Often, inserting and deleting shapes can disturb the alignment of the diagram. It can also make the elements of the diagram space out unevenly. To get around this, Visio provides tools that automatically align and space the shapes in your diagram so that it looks perfect.

Align and Space Shapes

To automatically align and space shapes in a diagram, go to the Position dropdown menu in the Arrange section of the Home tab. Click either Auto Space or Auto Align & Space depending on the requirement. You can also hover the mouse on these commands to preview how the diagram would look after alignment.

Aligning SmartShapes

After alignment, you can still move the shapes in your diagram, if you’d like a more customized appearance.

Microsoft Visio — Re-layout Page

Visio provides options for automatically changing the layout of the diagram with the ReLayout Page command. The Re-Layout Page command provides commonly used layouts. You can also customize some of the aspects of the layout as needed.

Changing the Diagram Layout

Open the diagram and navigate to the Design tab on the Ribbon. Click the Re-Layout Page dropdown menu and select a layout as needed. You will see that the diagram now changes to the selected layout. You can also preview the look before clicking by hovering the mouse over the layout style.

Design

Customizing the Layout

You can further customize the layout by clicking More Layout Options… in the Re-Layout Page dropdown menu. This opens a dialog box in which you can configure the layout properties.

You can change the spacing between the shapes by manually changing the values in the Spacing field.

Configure Layout

You can also change the appearance of the connectors to curved by selecting Curved in the Appearance dropdown menu. Remember to select the Apply routing style to connectors checkbox to be able to change the appearance of the connectors.

Microsoft Visio — Inserting Text

Visio allows inserting text either within the shapes or in the document. You also get to do text formatting just like any other text editor.

Inserting Text in a Shape

It is easy to insert text within a shape. Just double-click within a shape to type the text. The text automatically wraps according to the shape, however, you can also press hard returns if you’d like to have your own wrapping. Notice that Visio automatically zooms into the shape to enable typing and zooms out when you click outside the shape.

Inserting Text

Inserting Text in a Document

To insert a text in a document such as a heading for the chart, click the Text Box dropdown menu in the Insert tab on the Ribbon and select either horizontal or vertical text box.

Inserting Text in a Document

Then place the cursor on the document and draw a text box to start typing.

Microsoft Visio — Inserting Backgrounds

Backgrounds are inserted using pages called background pages. Background pages can contain graphics or text such as copyright info and other information. Background pages are always separate but appear overlaid on the main page.

Inserting a Background Page

You can change the background of a document by choosing from preset backgrounds or using your own background template. To insert a background, click the Background dropdown menu from the Design tab on the Ribbon and choose a background preset.

This creates a new page in addition to the diagram page. You can right-click the newly created background page to rename it. The new background will be automatically applied to all newly created pages in the document.

Trial Communication Process

Microsoft Visio — Inserting Graphics

Apart from the shapes that are part of the diagram, you can add your own images to the document. Images can come from any online or offline source. If you add an image to the background page, the image will appear on all the pages in the document.

Adding Graphics to a Document

To insert your images or graphics, go to the Insert tab on the Ribbon and select from any of the commands in the Illustrations section. It can be a picture on your local drive, an online source, a chart or even a CAD drawing.

Pictures

You can also replicate the picture on all the pages by inserting the picture in a background page. To do this, select the background page and insert the picture as described above. Drag and resize the picture as needed.

Picture in Background Page

Now, navigate to the page containing the diagram and you will find that the picture appears on that page and any other subsequent pages that are added.

Inserting Graphics

Inserting Containers and Callouts

Sometimes, you might want to combine two or more elements of the diagram together. You can use containers to group shapes that are dependent on each other. Callouts help in inserting more text outside the shape. Callouts are always connected to the shape and move along with it.

Inserting a Container

First group the shapes together by selecting Group in the Arrange section of the Home tab.

Inserting a Container

To insert a container, go to the Insert tab on the Ribbon and click the Container dropdown menu in the Diagram Parts section. You will see that there are many designs to choose from for the container.

Once you select a design, you can drag the container around the grouped shapes. Release the mouse to lock the container. The container also contains an area for typing text. Double-click the heading area to type the text. In the following example, we have labelled the container as ‘End Process’.

Whenever you drag the container, the contents of the container move together.

End Process

Inserting a Callout

Select the shape for which you want to use the callout. To insert a callout, go to the Insert tab on the Ribbon and click the Callout dropdown menu in the Diagram Parts section. You will see that there are many designs to choose from for the callout.

Inserting a Callout

Select a design appropriate for the callout. The callout will appear connected to the selected shape.

In this example, we have added a callout for the Back to Research process called Extensive Research. The callout is linked to the shape and can be moved about anywhere in the drawing, however it will always stay connected to the shape.

Visio will zoom in when you click the callout to enable typing and will zoom out when clicked outside the callout.

Extensive Research

Microsoft Visio — Inserting Hyperlinks

In this chapter, we will learn how to hyperlink websites, files, and pages.

Hyperlinking Websites

To insert a hyperlink, first create a text box by going to the Insert tab in the Ribbon and drawing a horizontal text box for the text that represents the hyperlink such as ‘Website’ or ‘Click here to visit us’. This text now needs to be converted into a hyperlink.

To do so, select the text in the text box and in the Insert tab again. Click Link to open the Hyperlinks dialog box.

You can specify the links to websites or a local file on your computer. Click OK to convert the selected text into a hyperlink.

Hyperlinks

Hyperlinking Files

You can directly hyperlink a text or a shape to a file. Double-clicking the text or shape opens the hyperlinked file. The procedure is similar to hyperlinking a website.

Select the shape or text that you want to create a hyperlink for and click the Link button in the Insert tab of the Ribbon.

In the Hyperlinks dialog box, click Browse… adjacent to the Address field and click Local File… to browse to the location of the file.

Hyperlink Files

Make sure that the Use relative path for hyperlink box is selected to ensure that the file path is updated automatically when you change the file location.

Hyperlinking Pages

Visio also makes it possible to hyperlink pages in a multi-page document so that clicking the link will directly take you to the linked page.

To hyperlink pages, select a text or shape to be linked to and click Links in the Insert tab in the Ribbon. In the Hyperlinks dialog box, make sure to click Browse… adjacent to the Sub-address field. Select the destination page in the Page field. You can also set a default zoom level in the Zoom dropdown menu so that navigating to the linked page opens it at the desired zoom.

Click OK twice to set the hyperlink.

Hyperlink Pages

Microsoft Visio — Themes

In this chapter, we will learn how to apply themes in Visio.

Selecting a Theme

You need not be content with the default theme. Visio allows to customize the theme and overall look of the document. To apply a theme, go to the Design tab and choose from any of the many theme options available. You can choose from a selection of Professional, Hand Drawn, Trendy, and Modern themes.

Once you click any of the available themes, the theme will be applied to the document. You can further personalize it by selecting from one of the many options in the Variants section.

Selecting Theme

Changing Theme Colors

The Variants section allows you to customize theme colors as needed. Clicking the dropdown menu in the Variants section allows to customize the theme colors, effects, and connectors.

To customize a theme color, go to the Colors submenu in the Variants section and click Create New Theme Colors…

Changing Theme Colors

It opens the New Theme Colors dialog box, which allows to customize each of the accents in the theme. Once you’ve decided on the color scheme, name the theme, and click Apply or OK to save the theme color scheme and apply it to the diagram.

New Theme Colors

Microsoft Visio — Text Formatting

If you are familiar with Microsoft Word, you should be right at home in Visio with respect to formatting text. You can format titles and text within shapes. You can also use the Format Painter command to copy formatting and paste it into another shape or text box.

To format the text, select the text box containing the text or highlight the text itself. Then, choose from the options available in the Font and Paragraph sections of the Home tab.

You can change the font, size, color, and paragraph alignment. If you want to change the font styles in a shape, just double-click the shape to select the text within the shape and change the font styles as desired.

Text Formatting

Microsoft Visio — Shape Formatting

You can also format the shapes to give them a more professional or casual look as desired. To format shapes, select the shape in the diagram and format using the options available in the Shape Styles section.

Shape Formatting

You can select predefined shape styles or you can customize the shape using the Fill dropdown menu. To adjust the color of the shape border, select a color from the Line dropdown menu. The Effects menu allows to add special effects to your shape such as drop shadows or 3D rotations.

Microsoft Visio — Formatting Shape Lines

Visio makes it easy to format the shape outlines and the connectors. You might be looking to format a shape outline to make it stand out from the rest of the shapes or to highlight something important.

Formatting Shape Outlines

To format a shape outline, click the shape or hold down the Ctrl key on the keyboard and select multiple shapes. Then, from the Shape Styles section of the Home tab, click Line and select Line Options… This will open a Format Shape flyout. In the Line section, select the options you need to customize the shape outline.

Formatting Shape Lines

You can change the color of the shape outline, increase the width to add more weight, change the rounding, and a whole lot more. You can also create gradients for the line to suit the diagram.

Formatting Connectors

Like shape outlines, connectors can also be formatted as needed. To format a connector, select the connector in the diagram and bring up the Format Shape pane by going to the Line dropdown menu and clicking Line Options…

In the Line section of the Format Shapes pane, select the Dash type of your choice to change the connector pattern. You can also change the color of the connector and adjust the transparency levels as needed.

Formatting Connectors

Microsoft Visio — Rulers,Grids and Guides

Visio comes with visual aids to help align and structure the elements in the diagram so that it appears great both on-screen and in print. The main visual aids available include rulers, grids, and guides.

Rulers

Rulers help in providing perspective to the elements in the diagram. They help orient the shapes to attain a consistent and clean look. Rulers can be switched off or on with a simple checkbox in the Show section of the View tab.

Rulers

When you move a shape, you will notice that there are 3 dotted lines (shown in the following example in red rectangles) on both the vertical and horizontal rulers. These 3 dotted lines denote the left, middle, and right parts of the diagram. When you drag the shape vertically or horizontally, these 3 dotted lines help position the shape exactly at the place you need.

You can turn of the Ruler checkbox if you need some screen estate.

Guides

Just like rulers, guides help in orienting different shapes of the diagram properly. You can create any number of guides from both the vertical and horizontal rulers. To create a guide, simply drag a line from either the vertical or horizontal rulers.

Guides

Guides are represented by lines, which appear thick when selected. You can delete a guide by simply selecting the guide and pressing the Delete key on the keyboard. Uncheck the Guides checkbox in the View tab to remove all the guides from view.

Dragging a shape onto a guide will enable you to snap the shape to the guide. When a shape is snapped to a guide, it moves along with the guide.

Glue to Guide

Grids not only help to align shapes within the drawing but can also be an important measurement tool. Grids comprise of square boxes of defined area, which can be adjusted. Therefore, grids help you have an estimate of the likely area occupied by the shape, which allows you to size the shapes as needed.

To turn grids on or off, simply check or uncheck the Grid checkbox in the View tab.

Ruler and Grid

You can also customize the size of each grid by adjusting the spacing between the grids. To do so, click the small downward facing arrow to the bottom-right of the Show section in the View tab.

This opens a Ruler & Grid dialog box where you can adjust parameters such as subdivisions in a grid, the horizontal and vertical spacing, etc.

Microsoft Visio — Using Visual Aids

Apart from commonly used visual aids such as the ruler, guides, and grids, Visio also comes with few other visual aids to help you better organize your diagram. These include AutoConnect, Dynamic Grid, and Connection Points.

AutoConnect

One of the advantages of using SmartShapes is the ability to quickly and easily connect a shape to the top four favorite shapes. AutoConnect helps to quickly select a shape from the top four and instantly establish a connection to the new shape. Sometimes, you might not need this feature. In such cases, you can disable the AutoConnect feature by simply unchecking the AutoConnect checkbox from the Visual Aids section of the View tab.

AutoConnect

When the AutoConnect checkbox is unchecked, the SmartShapes and connecting arrows do not appear when a shape is selected.

AutoConnect Checkbox

Dynamic Grid

Dynamic grid provides a relative alignment cue when you insert a new shape. When the Dynamic Grid option is turned on, you will see guides and indicators relative to the shape.

Dynamic Grid can be used in conjunction with the actual Grid. The actual Grid is more of an absolute measurement and should be considered when precise measurements are of importance in deciding the placement of the shapes. The Dynamic Grid is more of a relative measurement.

Dynamic Grid

In the above example, we see that turning on the Dynamic Grid allows us to see the relative distance of the new shape with respect to pre-existing shapes.

Connection Points

Connection Points help in connecting shapes to specific points along the surface of a shape. For example, a shape can have four Connection Points along its perimeter to which connectors can attach to. Turning on Connection Points help to connect shapes precisely at defined connection points.

Connection Points

Connection Points can be identified by green squares that appear on all sides of the shape. If you want to connect to the shape directly rather than to a connection point on the shape, uncheck the Connection Points checkbox in the View tab of the ribbon.

Microsoft Visio — Task Panes

Task Panes provide additional functionality to the user interface. You can use task panes to customize or add parameters to an object. The Shapes pane which is there by default, is an example of a Task Pane.

Task Panes can be floating or docked and can be resized as needed. Apart from the Shapes task pane, there are quite a few other panes, which can be accessed from the Task Panes dropdown menu in the View tab of the Ribbon.

Task Panes

Shape Data Pane

The Shape Data pane allows entry of additional shape metadata. This metadata is contextual and depends on the shape being selected.

Shape Data Pane

Pan & Zoom Pane

The Pan & Zoom pane allows to navigate and zoom to any part of the drawing easily. Pan & Zoom’s slider makes it easy to exactly zoom into a specific part of the diagram. This is especially useful while working with complex diagrams.

Pan and Zoom Pane

Size & Position Pane

The Size & Position pane allows you to change the dimensions of a selected shape. This allows to set precise measurements of a shape. You can also change the angle of orientation of the shape and the pin position from which the measurements are to be considered.

Size Position Pane

Navigation Pane

The Navigation pane is available only in the Office 365 version of Visio. It basically lists all the elements of the diagram and makes it easy to navigate to each of them. This is especially useful if the diagram has varied shapes and you want to navigate to a specific shape type. Selecting the name of the shape in the Navigation pane selects it in the canvas.

Navigation Pane

Microsoft Visio — Working With Windows

It is easy to work with multiple windows or multiple versions of a document in Visio. You can switch between windows easily or arrange them side by side for a comparative look. The options for window rearrangement can be found in the Window section of the View tab.

Windows

New Window

New Window basically allows to create a new copy of the existing window. The new copy will not show the stencils directly, however, they can be selected by clicking the More Shapes arrow in the Shapes pane.

The new window can be identified by the presence of a number in the title bar of the window. In the following example, the original file name was BlkDiagm.vsd. Using the New Window command creates a new window with BlkDiagm: 2 in the title bar.

New Window

Arrange All

This function allows you to arrange all windows side by side. This feature is useful for comparing two windows, however, if you have a high-resolution display, you might be able to accommodate more windows beside each other. The Shapes pane and other panes can be minimized to allow more screen real estate.

Arrange All

Cascade

This function allows cascading of windows to give an overall view of the open windows. The active window is in the foreground, while inactive windows are in the background with title bars visible. Cascade view is useful to know which documents are open at a glance.

Cascade

Microsoft Visio — Printing Diagrams

To print a drawing, simply go to the File menu and click Print or press the keyboard shortcut Ctrl+P. The Print menu provides several options to select the layout of the printed page and the printer to which you’d like to send the document for printing.

Printing Diagrams

The right side of the Print menu shows a preview of the output. You can change the orientation of the page, page size, and select only the pages that you need to print.

Depending on your printer, you can also print in color or in greyscale. Remember that printing in black and white might not produce a good output. It is best to print in greyscale, if you wish to save on your printer’s ink.

Microsoft Visio — Publishing to PDF

Visio includes several ways to create a PDF of the drawing, which is extremely useful for sharing with others. You can directly save the document as a PDF, print to PDF, or email the drawing directly as a PDF.

Save as PDF

You can save the drawing as a Visio drawing (.vsd or .vsdx) by default or save it as a PDF, which can then be opened by any freely available PDF reader such as Adobe Reader. To save as PDF, go to the File menu, click Save As and then click Browse. This opens the Save As dialog box. Select PDF in the Save As type field to save the document as a PDF.

Save as PDF

Print to PDF

You can also directly print to PDF if you have a compatible software printer such as Adobe PDF or Microsoft Print to PDF installed. You might want to use this if you need to have fine grain control over the PDF document such as PDF version or compatibility properties.

Print to PDF

Email PDF

You can also directly email the diagram to a recipient. To do this, go to the File menu, click Share and then click Send as PDF. This creates a new email in your default email client with the PDF file readily attached. Just enter the email address of the recipient to send the attachment.

Email PDF

Export Diagrams to JPG or GIF

Similar to PDF, Visio can also export image formats such as JPG, GIF, TIFF, PNG and Bitmap. Exporting image formats is useful while sharing the drawing easily with others or to put it up on a web page.

To export a drawing, go to the File menu, click Save As and in the Save As type field, choose from the list of supported formats. You can choose from any of the abovementioned graphics formats.

Once you choose a graphics format to export to, you will get some options to choose from depending on the capabilities of the graphic format. In the following example, we see that selecting the JPEG File Interchange Format shows up a lot of options for customizing the output.

The options in the Operation and Color format fields are format specific. You can leave them mostly as default. Set the Background color as white if you have a background for the drawing. Set the Quality as needed. You can also rotate the drawing or flip it horizontally or vertically.

JPG Output Options

The resolution and size of the output diagram can be matched with the screen, printer, or source. You can also input a custom resolution or size. Click OK.

Exporting to Web Pages Using HTML

You can also export drawings to web pages which can be hosted on a web site. Visio allows customizing what goes into the web page. Go to the Save As dialog box from the File menu and select Web Page in the Save As type field. Then, in the same dialog box, click Publish… to open the HTML publishing options.

You can select which of the components of the diagram that you want to publish and the number of pages to publish. You can also provide a page title.

The HTML file is created in the chosen location along with a folder containing the supporting files. Both the HTML file and the folder are linked together.

Save as Webpage

Creating Layers with SmartShapes

Adding SmartShapes automatically creates layers. Layers are basically overlays, which can be individually customized and turned on or off. Each shape and connector in the diagram forms a layer whose properties can be customized.

To know the list of layers in the diagram, in the Editing section of the Home tab, click the Layers dropdown menu and click Layer Properties…

General

This opens the Layer Properties dialog box, which you can use to customize the different layers in the diagram.

Layer Properties

The Layer Properties dialog box lists the different layers in the document and allows changing the individual properties of the layers.

Microsoft Visio — Working with Layers

Layers are automatically assigned to shapes. However, Visio allows to assign layers to shapes as needed. You can also create your own layers. Let us start by creating a new layer and then assign some shapes to the new layer.

Creating a New Layer

Go to the Layer Properties… dialog box in the Layers dropdown menu from the Editing section of the Home tab and click New… Type a name for the new layer.

New layer

The new layer will be created in the Layer Properties dialog box and will initially have zero shapes, as they are yet to be assigned. Click OK.

Assigning Shapes to a Layer

Shapes can be assigned to any layer. To assign a shape to a layer, click the shape or connector in the diagram and then, click Assign to Layer in the Layers dropdown menu from the Editing section of the Home tab.

Assigning Shapes to Layers

It opens the Layer dialog box from which a shape can be assigned to either an existing or a newly created layer.

Pipelines

Note that the New Layer that was created earlier is now in the list. A shape can be assigned to more than one layer as well. To assign a shape to all the layers in the document, click All and then click OK.

Microsoft Visio — Layer Settings

The Layer Properties dialog box allows to change the properties of individual layers. It comprises of several checkboxes such as Name, #, Visible, Print, Active, Lock, Snap, Glue, and Color.

The Name field lists the type of layer, while the # field lists the number of shapes in that type. In the following example, we see that there are nine equipment shapes in this diagram.

Annotations

There is a row of checkboxes for each layer type that can be selected or deselected. Unchecking the Visible checkbox makes the shape invisible in the drawing. If the Print checkbox is checked, the shape will be printed along with the others. Unchecking the Print checkbox will not print the shapes in the layer.

Similarly, layers can be made active or locked. Shapes in an active layer can be manipulated without affecting the other shapes or layers. When you lock a shape, Visio prevents any changes from happening to the shape. You cannot drag the shape or change its contents. Snap and Glue will be checked, if the shapes are allowed to snap to a grid. You can also represent a layer by a color for easy recognition.

When you represent a layer by its color, the shapes belonging to that layer will also be colored in the diagram. This is useful if you want to differentiate a set of shapes from another.

Microsoft Visio — Themes and Styles

Themes and Styles are useful to give the diagram a design makeover and make it stand out. Visio provides a standard set of themes and styles, which are customizable.

Themes

Themes apply to the entire diagram. Themes comprise of a set of colors and effects that generally blend well with each other. They are a great way to quickly give the diagram a polished look. Themes also affect other parts of the document such as titles, headings, text, etc.

To apply a theme, go to the Design tab and select a theme from the Themes section. The dropdown arrow provides more choices categorized by theme type. When you click a theme, all the aspects of the diagram and other parts of the document reflect the theme settings.

Themes

A theme can have many variants, which can be selected from the Variants section of the Design tab.

Styles

Styles are different from themes such that, they are applicable to a selected shape or a group of shapes. Styles help in customizing the aspects of a particular style.

To change a style of a shape, select the shape and from the Home tab, then select a style from the Shape Styles section. Style can be applied to both shape elements in the diagram as well as to individual text boxes. You can select multiple shapes to apply the style to all of them together.

Styles.

When you change a theme after applying a style to a shape, the shape will take up the characteristics of the theme but will still remain distinct from other shapes. Of course, you can continue to customize the style even after applying a theme.

Applying Theme Colors and Effects

Themes are useful to customize the appearance of the document. Visio goes a step further and allows to customize the themes themselves.

Themes come with variants that can be further customized as needed. Theme variants can be accessed from the Variants section in the Design tab. You can use the stock variants or click the dropdown menu to customize many other aspects.

In the Colors menu, you will find that there many color combinations to choose from.

Color Combinations

The Effects menu shows some of the effects that can be applied onto the selected shape.

Effects

You can also choose from a range of connectors.

Range of Connectors

Blocking Themes from Affecting Shapes

Sometimes, it becomes necessary to prevent themes from affecting one shape or a group of shapes, especially if they have important information that has to be presented in a particular way. Visio allows to protect a shape, thereby preventing any theme changes from affecting the shape’s intended design.

To enable protection for a shape, click a shape or a group of shapes. Go to the Developer tab in the Ribbon, click Protection in the Shape Design section. (Note − You may need to first enable the Developer tab by customizing the Ribbon).

Developer

This opens the Protection dialog box that allows to select which components of the shape to protect from being overridden.

We will focus on protecting the theming of the shape for now. So, select the checkboxes for Text, Format, From theme colors, From theme effects, From theme fonts and finally, From theme index. Click OK.

Protection

If you now select any theme from the Design tab, you will notice that the shape that is protected is unaffected by the theme change.

To reverse the changes, simply go to the Protection dialog box again, click None and finally click OK.

Custom Color Scheme for Themes

Visio comes with a good selection of themes and variants to suit almost any need. However, sometimes you might have the need to create a specific color scheme that reflects your organization.

To do this, select a theme from the Design tab and choose a variant from the Variants section that closely matches to what you intend to create. Then, in the Colors menu in the Variants section, click Create New Theme Colors…

In the New Theme Colors dialog box, give a name for the theme in the Name field. There are 5 accent colors to customize. Depending on the colors that you want to customize, choose a color for each accent. Click Apply to see a preview of the effect. Once you are satisfied with the color scheme, click OK to save the color scheme.

Theme Colors 1

The new color scheme can be found in the Custom section of the Colors menu. You can always edit this color scheme by right-clicking the custom scheme and clicking Edit.

Colors Menu

Microsoft Visio — Working with Org Charts

Organization charts or org charts are a great way to depict hierarchy in an organization. Visio provides ready-made templates to help you get started in creating org charts. In the following series of chapters, we will learn different aspects of creating and working with org charts.

Using the Org Chart Template

The easiest way to get started is to use an inbuilt org chart template and build upon it. In Visio 2016, the org chart template can be found by going to the New menu. Click the Home button, click New and select the Templates tab. In the Templates tab, go to the Business category and click Organization Chart.

New

It will open a dialog box in which you can choose the chart to be created in either Metric or US units. Select the units you are comfortable with and click Create to load the org chart shapes in a new diagram.

Organization Chart

Inserting a Top-Level Executive Shape

Once the chart is created, you will notice that the Ribbon has a new Org Chart tab that lists the shape styles you can use.

Org Chart Tab

The Shapes pane has all the shapes necessary to use in a org chart. The shapes change based on the shape style selected in the Org Chart tab in the Ribbon. In this example, the currently selected shape style is Belt.

Belt Organization Chart Shapes

To insert a top-level shape, drag the Executive Belt shape over to the canvas and align it to the center of the page.

Top Level Shape

Inserting Manager Sub-shapes

Once the top-level executive shape is created, it is easy to create manager sub-shapes. The Executive Belt shape will not offer SmartShapes as this is a hierarchical chart with defined positions.

To insert a manager, simply drag the Manager Belt shape onto the Executive Belt shape. You will notice that Visio automatically connects both the shapes. You can add more Manager Belt shapes onto the Executive Belt shape and Visio will automatically connect, space, and align all the shapes.

Sub-shapes

You can then enter details into the shapes by zooming in and double-clicking the shape to activate the text box. Unlike the Executive Belt shape, the manager shapes will offer the choice of using SmartShapes.

Microsoft Visio — Subordinate Layouts

We can continue building on the org chart previously created. Based on the organizational hierarchy, corresponding shapes can be added to the existing shapes. Visio will then automatically create the connection and align the new shape in the diagram.

Adding a Position Belt

A position belt is used to indicate a position under an executive. In the following example, several position belts have been added to each of the three manager sub-shapes. To add a position shape, simply drag the Position Belt shape from the Shapes pane over any of the manager sub-shape. Visio automatically creates the Position Belt shape and connects it to the manager shape above.

Adding Position Belt

Adding a Vacancy Belt

In an organization, not all positions will be always full. There will be a few vacant positions that need to be filled. You can indicate a vacancy by dragging the Vacancy Belt shape onto any of the managerial shapes. A vacancy shape is different from the other shapes and can be easily identified.

Vacancy Belt

Adding Consultant and Secretary Shapes

Similarly, you can also add the consultant and assistant shapes to the org chart. In the following example, a consultant has been added to the CTO and an assistant to the CEO. Drag the Consultant Shape on top of the CTO shape and the Assistant shape on top of the CEO. Visio will automatically adjust the spacing and connections between the shapes.

Adding Consultant and Assistant Shapes

Microsoft Visio — Team Member Re-ordering

It may be necessary to re-order team members in the org chart. Shapes can be moved to the left and right or to the top and bottom, depending on how you’d like them to be ordered. Since this is an org chart, there will be an Org Chart tab in the Ribbon. Click the tab and in the Arrange section, click either of the arrows in the Move command.

Move Command

Depending on the position of the shape in the drawing, moving left and right can also mean moving up and down. When you move a shape, all sub-shapes also move along with it. In the following example, the COO shape was moved to the right and with it, all positions below it also move.

COO Shape

Adding Team Frames to a Diagram

A team frame helps to denote members of different teams who work on a common project. To add a team frame, drag the team frame shape from the Shapes pane onto the teams that you want to include.

Team Frames

The team frame can be adjusted along its handles to accommodate as many members as needed. The team frame border line and the label can be formatted as needed. To format the team frame border, click the team frame and go to the Home tab and in the Shape Styles section, select the shape formatting needed.

Shape Stles

Microsoft Visio — Creating Report Indicators

A dotted line report helps in identifying individual team members who report to multiple people. To add a dotted line, drag the Dotted-line Report shape from the Shapes pane onto the canvas.

Move End Point

You will see that there are two endpoints to the dotted line. Drag one of the endpoints to the first shape and the other endpoint to another shape to create a dotted line that indicates the team member reports to more than one position.

Dotted-Line

Creating Three and Multiple-position SmartShapes

Although you can create individual shapes by dragging the desired shapes from the Shapes pane, Visio facilitates creating multiple shapes at one go. All shapes added together will be automatically connected and aligned.

Creating a Three-Position SmartShape

To create a three-position SmartShape, drag the Three Positions shape onto any of the higher manager shapes.

Three-Position SmartShape

This creates three shapes directly below the higher shape. You will notice that the shapes can spill over onto the next page. This can be rectified by clicking the Re-Layout button in the Layouts section of the Org Chart tab.

Re-Layout Button

Creating a Multiple-Position SmartShape

Similar to a three-position SmartShape, Visio also helps to create a multi-position SmartShape in which you can select as many positions as you want. To create a multiposition SmartShape, click and drag the Multiple shapes from the Shapes pane onto a selected shape on the canvas.

Multiple Shapes

It opens an Add Multiple Shapes dialog box in which you can select the type of shapes and the number of shapes to be added. Click OK to add the shapes to the selected shape.

Microsoft Visio — Adding Executive Pictures

You can add pictures to different levels in your org chart to make it more visually appealing. To add executive pictures, double-click the shape to zoom into it and then click the picture field within the shape.

Picture Tools

Then click the Insert button to select a picture for adding into a shape. To prevent an image from showing up in a shape, click the Show/Hide button.

After adding an image, you can use the usual picture formatting tools to adjust the brightness and contrast or crop the image.

File

If you want to automatically import executive pictures into their respective hierarchies, simply make sure the file names of the executive pictures match that of the names in the shapes. Then import the entire folder and Visio will automatically place the executive in his/her corresponding hierarchy.

Breaking Down Structures Using Sync Copies

It might be required to break down the org chart so that each executive gets his/her own page to avoid congesting the chart. Synchronization allows any change made to the executives in other pages to remain in sync with the main page.

To synchronize a shape, click the shape and then the Synchronize button in the Org Chart tab.

Synchronize Button

This opens the Create Synchronized Copy dialog box, which allows to create a copy of the shape and its subordinates on a new or an existing page.

Click the Hide subordinates on original page checkbox, if you want to collapse the shape on the main page. Any changes made on the synchronized shape pages will be seen on the main page as well.

Synchronize Copy

Microsoft Visio — Reporting Structure Views

Individual manager shapes can be collapsed and shown as needed. Collapsing shapes is useful to reduce the clutter in the diagram.

To collapse the hierarchy under a shape, right-click a shape, go to the Subordinates menu and click Hide Subordinates.

Subordinates

The subordinate shapes then collapse under the manager shape. This is indicated by a tree icon under the manager shape.

Tree Icon

If the shapes are synchronized, any changes made to them elsewhere will be automatically reflected in the main shape.

To reveal the subordinates again, right-click the manager shape, go to the Subordinates menu and click Show Subordinates.

Show Subordinates

Microsoft Visio — Using the Org Chart Wizard

Although you can manually create the org chart using different shapes in the Shapes pane, Visio also provides an automated way of importing information about your organization from an external source. In this chapter, we will look into importing data from information in an Excel spreadsheet.

Creating Information in an Excel Spreadsheet

Create an Excel spreadsheet or use an existing one containing some of the important information in the header row that goes into creating an org chart. Important information includes Employee, Title, Manager and Department. The Employee and Manager fields are mandatory and the others are optional.

Additionally, you can also include a field called the Master_Shape, which indicates the exact shape to be used for a particular employee. Note that the name, Master_Shape field needs to be used as is for Visio to designate a specific shape to the employee.

Excel Spreadsheet

Starting the Organization Chart Wizard

There are two ways of starting the Organization Chart wizard. The first method involves using the Organization Chart Wizard from the Templates section in the New menu.

Organization Chart Wizard

The other method is to use the Import command in the Organization Data section from the Org Chart tab in the Ribbon, if you have already created an org chart.

Organization Data Section

The second method is recommended if you need the background formatting to carry over onto all the pages in the org chart. The first method creates all the pages required, but you need to individually format each page, which can get tedious if your organization is large.

Either ways, the Organization Chart Wizard appears in which you can specify the features of your org chart.

Using the Organization Chart Wizard

The first screen of the Organization Chart Wizard gives the option of either selecting the existing information from a file or manually entering information. For this example, we will choose the first option. Click Next to proceed to the next screen in the wizard.

Organization Chart Form

In the following screen, you can choose the source in which the organizational information is stored. It could be a location on a Microsoft Exchange Server, a local text, CSV or Excel file, or an ODBC-compliant data source. Select the second option and click Next.

ORG Plus

Now, enter the location or path to the Excel file and click Next.

Next

In this screen, in the Name field dropdown, select the field in the Excel spreadsheet that contains the name of the employee. In the Reports to field dropdown, select the field in the Excel spreadsheet that denotes the reporting manager. If the name and first names are in different fields, specify the field containing the first name of the employee in the First name dropdown.

Visio will combine the name and first name fields to generate the full name of the employee. Click Next to continue.

First Name

The Data File Columns box lists all the data fields that are present in the header of the Excel file. You can select the fields that you need to be displayed in the Displayed Fields section by selecting the required fields and then click Add. Click Next, once the desired fields are added.

Columns

In the next screen, you can choose the fields the shape data should be based on. The shape data fields will be similar to the fields selected in the previous step so in most cases, you can leave it as such. You can also add any additional fields if needed.

Additional Fields

In the following screen, you can choose to include pictures of the employees. If you have labelled pictures in the same format as the employee names, you can point to the location of the folder containing pictures of all the employees. Or you can simply choose not to include any pictures.

Import Pictures

In this screen, you can choose how much of organization info can be displayed on one page, if there are many employees spanning many pages. You can also choose to allow Visio to automatically break the org chart across pages. Make sure that Hyperlink employee shapes across pages and Synchronize employee shapes across pages are selected. Click Finish to finally create the org chart.

Finish to Create ORG Chart

After clicking Finish, Visio will start processing information from the Excel spreadsheet and create the org chart based on the parameters specified in the wizard. You will see a progress indicator showing the status of the creation.

Status

Publishing Organizational Charts

The completed org chart can be saved as a PDF or any of the image formats by going to the File menu and clicking Save As. Select from any of the file types in the Save As type field.

JPEG File Interchange Format

If you save the drawing as a JPG or GIF file, you will get another dialog box, which allows to further specify the output options.

Color Format

Structure of Brainstorming Diagrams

A brainstorming diagram is similar to an org chart but is used more to convey different ideas about a topic. To create a brainstorming diagram, click File and go to the New menu. In the Templates section, select Business, and then in the list of templates, select Brainstorming Diagram, choose the desired units to work with and click Create.

Brainstorming Diagram

You will notice that the brainstorming diagram document is created and ready to use. This has a few notable differences compared to the org chart. Firstly, the number of shapes are lesser than an org chart. Secondly, there is an Outline Window that appears in the drawing showing the outline of the diagram. Thirdly, there is a Brainstorming tab added to the ribbon, which contains tools required to use the brainstorming diagram.

Brainstorming Tab

To create the central topic for the brainstorming diagram, drag the Main topic shape onto the canvas. Unlike the org chart where you had to double-click the shape to enter text, you can start typing text in a brainstorming diagram as soon as you drag the shape onto the canvas.

Main Topic

Adding, Editing and Placing Subtopics

In this chapter, we will learn how to add, edit and place subtopics in the brainstorming diagram using Visio.

Adding Subtopics

In a brainstorming diagram, sub-shapes are not directly inserted on top of the main shape. A sub-shape is inserted as a subtopic. To insert a subtopic, first click the Main topic shape and then click the Brainstorming tab on the Ribbon. In the Add Topics section, click Subtopic.

Adding Subtopics

It creates a subtopic to the Main topic shape, which is ready to type on.

Main Topic Shape

You can also create multiple subtopics at once by clicking the Multiple Subtopics in the Add Topics section. This opens the Add Multiple Topics dialog box, where you can enter the names of each of the subtopics.

Add Multiple Topics

Each subtopic is automatically connected to the Main topic shape.

Subtopic Connected to Main Topic

Editing and Placement of Subtopics

Subtopics can be edited simply by clicking the title of the subtopic and typing over it. You can also edit a subtopic by clicking its name twice in the Outline Window. The Outline Window represents the topic hierarchy of the brainstorm. The subtopics can be dragged by their connectors and placed anywhere on the canvas. They will always be linked to the Main topic shape.

Editing Placement Of Subtopics

Editing Topics in the Outline Window

The Outline Window makes it easy to edit the order of topics or topic names in the diagram. Any changes made in the Outline Window will be readily reflected in the actual diagram.

Outline Window

The Outline Window can be pinned or unpinned by clicking on the push pin icon to the bottom left of the window. This enables the window to auto-hide when not in use.

Topics can be edited by clicking twice on the topic name within the window and typing. The order of the topics can also be changed by clicking and dragging the topic from one subtopic into another. You can also right-click a topic and Move Up or Move Down to change the order of the topics.

To delete a topic, right-click a topic and then click Delete Topic or simply select a topic and press the Delete key on the keyboard.

Customizing Topic Shape, Style and Layout

You can customize the brainstorming diagram in a similar manner to other types of diagrams by changing the shape, style, and layout.

Customizing the Topic Shape

The shapes of individual topics can be customized into a variety of built-in shapes. Hold down the Shift key, select the topics one by none and in the Brainstorming tab, click Change Topic in the Arrange section.

This opens the Change Shape dialog box, which lists the shape types you can change to. Select a shape type and click OK.

Change Shape

Customizing the Topic Style

The brainstorming diagram can be customized by choosing different themes and theme variants. To choose a theme, go to the Design tab on the Ribbon and select a theme. You can also choose different variants for the theme by selecting a variant in the Variants section. The Variant section has a dropdown using which you can further customize the colors and effects such as drop shadows.

Customizing the Topic Layout

You can also customize the style of the diagram so that it looks more elegant and professional. In the Brainstorming tab, click Diagram Style to open the Brainstorming Style dialog box. You can choose from a variety of brainstorming styles and also a couple of mosaic options, which includes a mix of all the styles. Select a style and click Apply to see the result. Click OK to close the dialog box.

Brainstorming Style

You can also customize the layout by clicking Layout in the Brainstorming tab. Select a layout from the Select a layout section. You can also choose the type of connector in the Connectors section. Select a layout and click Apply to see the result. Click OK to close the dialog box.

OK Button

Sending Data to Word and Excel

You can send brainstorming data directly to Word and Excel and in fact, to any program that accepts XML input. Data in the Outline Window is exported to a Word or Excel document and is opened as an XML file. Any changes can be saved to this XML file, which can then be imported back into Visio.

To export data as an XML file, in the Manage section of the Brainstorming tab, click Export Data and select either Microsoft Word or Microsoft Excel. Note that these options are available, only if you have the 2016 versions of Word and Excel installed on your computer. For other versions of Word and Excel or for using any other compatible program, select To XML… instead.

Export_data

For example, when you export the data to Excel, Visio automatically opens Excel once you save the XML file. In Excel, the data is organized into topic levels. For example, T1 represents the main topic, T1.1 represents the first subtopic under the main topic, T1.1.1. represents further subtopics under the subtopic and so on. You can add or remove topic hierarchies here and save the XML file, which can then be reimported back into Visio.

Excel

Creating and Configuring Timelines

Similar to org charts and brainstorming diagrams, you can also create timelines in Visio to depict a schedule or a series of events.

Creating a Timeline

To create a timeline, go to the New menu in the File tab and click Templates. Go to the Schedule category, click Timeline and then Create to create the timeline workspace. Since the timeline essentially measures time, units selection is inconsequential.

Creating Timeline

Configuring a Timeline Shape

Once the Timeline template is created, click and drag the Block timeline shape from the Shapes pane onto the canvas. This opens a Configure Timeline dialog box, where you can select the duration for the timeline and the Timescale. Click Ok.

Configure Timeline

It creates a timeline block with equal intervals between the selected dates.

Timeline Block

Microsoft Visio — Adding Milestones

Milestones represent specific points in time during which an important event has occurred or is scheduled to occur. To add a milestone, click and drag the Line Milestone shape onto a chosen interval on the timeline. It need not be dropped exactly on a specific interval, since you can manually configure the exact date and time of the event.

Configure Milestone

When you drag the milestone onto the timeline, the Configure Milestone dialog box appears, where you can specify the exact date and time of the milestone along with a description of the event. You can also choose from the standard date formats to better represent the time and date. Click OK to create the milestone on the timeline. The milestone can be dragged along the timeline, and the date and time of the milestone will be updated accordingly.

Microsoft Visio — Dealing with Collisions

When adding many milestones, it is possible that the description text of the milestones will run into each other creating a messy look. It is possible to avoid collisions by changing the position of the milestone text.

If you happen to have a colliding text, simply grab the yellow end of the milestone and drag to a separate position, such as the bottom or higher up. You can also angle the yellow end by simply turning your mouse to a desired angle. The idea is to ensure that the text doesn’t collide and is represented as clearly as possible.

Markers to Timeline

Once the yellow end is dragged and released, the Line milestone shape adjusts itself accordingly. You can also use the guides to glue the yellow ends of multiple milestones so that they are all aligned.

Indicators to Timeline

Adding Intervals to a Timeline

An interval denotes a block of time over the course of which an event occurs or is scheduled. To add an interval, drag the Block interval shape onto a location on the timeline. It opens the Configure Interval dialog box.

Configure Interval

In the Configure Interval dialog box, you can select the duration of the interval, the date format and add a description. Click OK to add the interval to the timeline. Intervals can overlap milestones or other events. By formatting the interval shape to make it transparent, any other shape behind it can be made visible.

Adding Markers and Indicators to a Timeline

Markers and indicators can be used to denote specific events such as current date or elapsed time. Markers help to gain a perspective of where you currently stand with respect to your objectives in the current timeline.

To add a marker such as today’s date, drag the Today marker shape onto the timeline. You might want to adjust the yellow end to ensure that the marker text does not overlap with your milestone or other information. The Today marker moves as days’ progress, giving you a real-time perspective of your current status.

Timeline Shapes

Another marker or indicator that can be useful is, Elapsed time. The Elapsed time indicator helps in gauging the time elapsed since the beginning of the timeline. It is indicated by a green rectangle along the duration of the elapsed time. Of course, just like any other shape, the color of the Elapsed time shape can be customized.

To show the elapsed time, drag the Elapsed time shape from the Shapes panel onto the timeline.

Elapsed Time

Microsoft Visio — Expanded Timelines

Expanded timelines are useful to get a zoomed in view of the finer aspects of a time period. For example, the expanded timeline can show many details of events in a particular period, which might not be visible on the main timeline.

To create an expanded timeline, drag the Expanded timeline shape onto the main timeline. This opens the familiar Configure timeline dialog box in which you can specify the start and finish dates. Since this is an expanded timeline, you can choose a lower scale such as weeks instead of months if you have a packed agenda for the week.

Expanded Timelines

The expanded timeline is connected to the main timeline by means of two dotted connectors with yellow ends. The yellow ends can be used to move or change the orientation of the expanded timeline. You can also add milestone events to the expanded timeline. However, any event or interval added to the expanded timeline will not show up in the main timeline.

More expanded timelines can also be added on top of the existing expanded timelines.

Microsoft Visio — Formatting Timelines

You can apply the usual formatting techniques, such as themes and variants to a timeline. You can also select a background so that all successive timelines are created using the background template.

For example, in the Design tab, click Borders & Titles to set a professional looking border that includes a title header so that all pages in this timeline have the same background and header information.

It creates a Background page that is overlaid on all other pages in the document.

Formatting Timelines

You can also change the timeline and other shapes to make it look like a block, cylinder, or a bracket by right-clicking the shape and selecting the corresponding type from the menu.

Microsoft Visio — Sharing Timelines

Timelines can be shared just like other Visio drawings as PDFs, Visio drawings, or graphic files. Visio also allows you to let others edit the drawing, if provided access. This happens via Microsoft OneDrive and you need to be signed in to Visio to access this feature.

To share a drawing for editing or review, go to the File menu and click Share. The document has to be first saved to the cloud, so click Save to Cloud to save the document to your personal or official OneDrive folder.

Once the document is saved to your OneDrive folder, you can invite others by sending them the link to the shared drawing. You can define whether people just get to view it or get to edit it as well. Your collaborators can then open the shared drawing in the cloud and open the drawing directly in their Visio installation.

Sharing Timelines

Note − Visio Online is available to Office 365 customers who have Visio included in their cloud subscription. They can open and review the drawing online in their browsers; however, any changes to the drawing itself requires the users to have a local copy of Visio installed.

Microsoft Visio — Creating Calendars

You can create calendars in Visio to help you better organize and deliver information. To create a calendar, go to the New menu in the File tab and click Templates, then Schedule. In the Schedule category, click Multi week Task Calendar and then Create to create the calendar workspace. Depending on your version of Visio, you might just notice the template as Calendar.

Creating Calenders

You will see that there is a default calendar created. You can however, create your own calendar by dragging the Month shape onto an empty canvas. This opens the Configure dialog box, where you can specify the calendar month. Days of the month are automatically filled and the weekends are differentiated from the weekdays.

Default Calender

Adding Appointments to a Calendar

In this chapter, we will learn how to add appointments to a calendar.

Adding a Single Day Appointment

To add a single day appointment, click the Appointment shape in the Shapes pane and drag it on to a location in the calendar.

This opens the Configure dialog box, where you can enter the details of the appointment. Click OK to add the appointment on the prescribed date.

 Calender Shapes

Adding a Multi-Day Appointment

Sometimes, appointments can stretch over multiple days. To add a multi-day appointment, click and drag the Multi-day event shape from the Shapes pane onto the calendar. This again opens a Configure dialog box, where you can specify details of the event along with the start and end dates. Once the multi-day appointment is created, you can drag the appointment handle to cover additional dates, if needed.

Multi Day Appointment

Microsoft Visio — Customizing the Calender

Calendars can be customized just like any other Visio drawing by applying themes and variants. Calendars can also be customized to show weather conditions or even moon phases.

To add a shape such as weather icons, scroll down the list of shapes in the Shapes pane and drag the desired icon onto a date in the calendar. You can align multiple shapes using the dynamic grids that appear when you try to align shapes next to each other.

You can also change the look and feel of the calendar by selecting themes and variants from the Design tab in the Ribbon.

Customize Calender

Microsoft Visio — Adding Additional Months

Adding additional months is simple in Visio. To add an additional month, first create a new page by clicking the Insert Page symbol at the bottom of the screen or by pressing Shift+F11 to add a new page. You can rename the page by double-clicking on the page title.

Additional Months

Once you add a new page, create a new calendar by clicking and dragging the Month shape onto the new page. Configure the calendar for the new month.

To add additional months, simply create new pages by duplicating the current page. To duplicate a page, right-click the name of the page and click Duplicate. This creates duplicate of the current calendar page.

Duplicate

Now, simply reconfigure the calendar on the new page by going to the Calendar menu on the Ribbon and clicking Configure. When you change the month, you get a warning message that all scheduling information will be lost. Click OK to reconfigure the calendar on the new page.

Reconfigure the Calendar

Importing Calendars from Outlook

You can import existing calendars from Outlook directly into Visio. Note − To import Outlook data, you need to have Microsoft Outlook installed and configured with the same Microsoft account.

To import Outlook calendar data, go to the Calendar tab in the Ribbon and click Import Outlook Data.

Import Calendars

Follow the steps in the wizard to import the calendar into Visio. You can import into an existing Visio calendar or create a new calendar with the Outlook data.

If you are importing into an existing Visio calendar, make sure to select the correct date range for importing, otherwise the data will not be shown in the Visio calendar.

Microsoft Visio — Creating a Floor Plan

Floor plans help to visualize the layout of a room or a floor in a building. Floor plans help architects to understand the placement of objects on the floor, and the design of doors and windows as well as other rooms.

Visio provides extensive assets for working with all kinds of floor plans and maps. To create a floor plan, go to the File menu and click New. In the Templates section, click Map and Floor Plans. Select Floor Plan from the list of available templates. Select the units of choice and click Create to create the floorplan.

You will notice that the options for floor plans are varied. The rulers now measure in feet instead of inches. The Shapes pane shows different shapes categorized under various headings for each component of the floor plan as shown in the following screenshot.

Walls,Shell and Structure

Scaling & Adding Structural Elements to a Floor Plan

Before adding elements to a floor plan, it is important to set the scale correctly. Setting the correct scale ensures that elements within the floor plan scale well according to the dimensions of the output paper.

To change the dimensions of the scale, click the Design tab and in the Page Setup section, click the downward facing arrow to open the Page Setup dialog box or press Shift+F5.

Scaling

In the Page Setup dialog box, click the Drawing Scale tab to set a defined scale. You can use a predefined scale or enter a custom value. You can set the Page size (in measurement units) fields to the appropriate page size.

Click Apply to see the changes in the dimensions of the ruler and click OK to close the Page Setup dialog box.

Drawing Scale

Adding Dimensions to a Floor Plan

In architectural drawings, it is important to know the right measurements. Visio helps you make accurate measurements of the various shapes in your floor plan. For accurate dimensions, it is important to set the scale of the diagram correctly.

To see the dimension shapes, click Dimensioning – Architectural category in the Shapes pane to reveal the measurement tools. In this example, we will measure the vertical dimension of a wall.

Dimesioning Architectural

Measure the Vertical Dimension of a Wall

To measure the vertical dimension, click and drag the Vertical shape in the Dimensioning – Architectural shape category and release it along the wall to be measured. You will see that the Vertical shape now has two yellow dots and two white dots.

The white dots are used to glue either end of the Vertical shape to the top and bottom length of the wall. The first yellow dot helps to separately visualize the Vertical shape from the actual wall. The second yellow dot helps to visualize the dimension value distinctly.

Vertical

Glue the white dots to the top and bottom of the wall. Then, drag the yellow dots as needed to properly visualize the dimensions.

If the scaling is done correctly, you will see the exact dimensions of the desired shape.

Document Stencil

Adding Furniture to a Floor Plan

You can add objects, such as furniture and office equipment to the floor plan to get a complete perspective. Visio provides a lot of shapes, which can scale according to the dimensions of the floor plan diagram.

To begin, we need to ensure that the required shapes for furniture and office equipment are visible in the Shapes pane. For this, click More Shapes in the Shapes pane and in the menu, go to Maps and Floor Plans, then to Building Plan.

In the submenu, make sure that Office Furniture and if needed, Office Equipment options are checked. You can then select the Office Furniture category in the Shapes pane to reveal a list of commonly used furniture.

Adding Furniture to Floor

You can now select the Office Furniture category in the Shapes pane to reveal a list of commonly used furniture. Drag the desired furniture shape into the floor plan and adjust the position as needed.

Make sure that the Shape Data pane is visible so that you can adjust the length and depth of the shape according to scale.

Shape Data Cube Work

Adding Titles and Other Information

You can add titles and other text information to a floor plan to convey information, such as the scale of the diagram, title of the designing company, etc.

Adding Text to the Floor Plan

To add text information to the floor plan, select the Text Box from the Insert tab in the Ribbon and draw a text box in an empty area in the diagram.

Insert

The text box can be used to then enter information, such as the scale of the diagram, so that the reader gets a perspective of the real object size. The scale information can be derived from the Drawing Scale tab of the Page Setup dialog box in the Design tab.

Design Tab

Adding Page Titles and Backgrounds

You can also add page titles and backgrounds as a background page so that it is reflected across all pages of the diagram. In the following example, we will add a background title information. Go to the Design tab and in the Backgrounds section, click Borders & Titles. In the dropdown list of designs, select one that matches your theme.

Titles and background

It creates a background layer that applies to all pages of the document. Double-click the text area to zoom in and type the title of the document. You can also change the date, if needed and even apply themes and variants to the floor plan for a more sophisticated look.

Background layer

Prototyping Software Using Wireframes

Wireframe diagrams are typically used by software developers to prototype the design of the software user interface. Wireframes help to visualize the position and behavior of various elements in the UI before the software can be deployed.

Opening the Wireframe Template

Click the File menu and then click New. In the Templates section, click the Software and Database category and scroll down to select the Wireframe Diagram template.

Wireframe Template

It opens the template for the Wireframe Diagram and the Shapes pane lists all the controls and buttons commonly used in a software UI as shown in the following screenshot.

Toolbars

Creating a Wireframe Dialog Box

In the following example, we will create a wireframe dialog box for the Print command. Click the Dialogs category in the Shapes pane and drag the Dialog form shape onto the canvas. You can resize the default shape as needed. Double-click the header text in the dialog box and type Print. We now have the outer frame for the dialog box.

Wireframe Dialog Box

Adding Elements and Controls to Wireframes

Once you have created an outline for a wireframe dialog box, you can add elements, such as text boxes and dropdown menus. We are creating a wireframe for a print dialog box, so the first dropdown menu should be one in which the user can select the printer from a list of printers.

Adding a Dropdown Menu

First drag the Label shape onto the dialog box. You can use horizontal and vertical guides to help you position the shape. Next, drag the Drop down shape onto the far right of the Label shape so that it glues to it. Double-click the Label shape to type the text. In this case, the name of the printer. Note − This is just a prototype to visualize a dialog box and the menus will not actually work.

Drop Down

Adding Other Buttons and Controls

Now that one dropdown menu is added, you can continue to add another dropdown menu to indicate the printer presets. You can also drag a box into the dialog box to designate a document preview area.

Most print dialog boxes will also have a page setup button to set various attributes of a page and it makes sense to include one here as well. To add a button, click the Controls category in the Shapes pane and from the list of shapes, drag the Button shape onto a suitable area on the page. Double-click the shape to enter text and name it, Page Setup.

You can also add backward and forward arrows as navigation guides under the document preview pane.

Controls

You can continue to add as many elements as you wish to get a feel for the prototype. Just remember not to clutter the wireframe with too many buttons.

Listing Shapes Used in Diagrams

Visio has robust auditing and inventory tools built-in that help to quickly review the various components of a diagram. You can extract information such as quantity of each of the shapes used in the diagram, properties of the shapes, text on the shapes, etc. as a table which can help you quickly review and ensure that the document is according to the prescribed specifications. In this example, we will extract a sample report that shows the names of the shapes used and their quantity.

To get an inventory of the document, go to the Review tab on the Ribbon and in the Reports section, click Shape Reports.

Review

It opens the Reports dialog box. You can create a new report definition by clicking New… or modify an existing report style by clicking Modify…

After selecting the required features of the reports, click Run… to start creating the report.

Reports

After the report is compiled, the Run Report dialog box opens, which allows to select the format of the report. Generally, it is preferred to export the report as an Excel file to enable easier sorting of data fields but you also have the choice of exporting as HTML, XML, or a Visio shape. Select Copy of report definition in the Save report with section to save a copy of the report within the document and click OK.

Visio Shape

Visio creates a report table detailing the features we selected. In this case, the name of the shape and quantity. If you have chosen to save the report as an Excel file in the previous step, clicking the report will open an Excel window within Visio where you can work with the contents of the report.

Inventory

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *